Accredited course Outline
Date retreived
22/07/2026 4:07 PM AWST
22/07/2026 4:07 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Unspecified Code Vehicle Body Building.metal Fabrication.welding
Unspecified Code Vehicle Body Building.metal Fabrication.welding
Accredited course
National Code:
State Code:
2998
2998
TGA Status:
Draft
Draft
DTWD Status:
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
030509 - Automotive Body Construction
AQF Level
Unspecified Code
Nominal Hours
932
Duration
Unspecified
Stream of Study
Partial Exemption to Recognised Trades Course (3211)
Accredited Date
Expiry Date
VET Act Classifier
C
VET Act Conditions
Description
To provide the student with technical training
equivalent to 1A and 1B of the TAFE segment of the
apprenticeship course in Vehicle Body Building,
Metal Fabrication and Welding.
To enhance skill development in all aspects of the
trade enabling the student to equal the level of
training of an industrial apprentice who has
completed one year of an apprenticeship.
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 63129 | Communication (Common Core) | 34 | Module | |
| 63133 | Communication (Trades) | 34 | Module | |
| 85363 | Drawing Vehicle Body Building | 24 | Module | |
| 85293 | Metal Fabrication App 1a | 144 | Module | |
| 85294 | Metal Fabrication App 1b | 144 | Module | |
| 98002 | Supplementary Practical Skills 1a | 68 | Module | |
| 98003 | Supplementary Practical Skills 1b | 68 | Module | |
| 85373 | Trade Mathematics A | 34 | Module | |
| 85374 | Trade Mathematics B | 34 | Module | |
| 87323 | Vehicle Body Building App 1a | 120 | Module | |
| 87324 | Vehicle Body Building App 1b | 120 | Module |
No information
VET Info Notes
1 The subjects 98002 and 98003 each have a duration of 120 hours in this
course.
2 REMEDIAL EDUCATION
The primary responsibility for initiating remedial
action necessary in the areas of technical training
related trade subjects rests with the individual
lecturer.
3 ACCREDITATION
On successful completion of the technical training
section of the course, the student shall be credited
with subjects 1A and 1B of the Vehicle Body Building
and Metal Fabrication apprenticeship course.
4 SUPPLEMENTARY PRACTICAL SKILLS
Factory and on-site visits should be undertaken when
available and relevant. On-site and on-campus real
work to be undertaken when relevant work available.
5 CERTIFICATE OF PRE-APPRENTICESHIP STUDIES
To be eligible for the Certificate of
Pre-Apprenticeship Studies the student must gain a
pass standard in each subject of the certificate.
6 NEW APPRENTICE TRAINING AND ASSESSMENT SCHEME (NATAS)
For an apprentice to be eligible for a
DEPARTMENT OF EMPLOYMENT AND TRAINING TRADE
CERTIFICATE, the apprentice must have achieved
the competencies as determined by the rules of the
appropriate Trade Training Schedule (TTS).
Achievement of College-listed competencies for each
apprentice, as listed in the TTS, is to be recorded
on the appropriate Trade Training Schedule
Assessment forms.
The Division of Industrial Training (DIT) will
require a completed College assessment report at the
conclusion of the apprentice's College training.
This report is to be forwarded to DIT prior to the
close of College business in the year of completion.
course.
2 REMEDIAL EDUCATION
The primary responsibility for initiating remedial
action necessary in the areas of technical training
related trade subjects rests with the individual
lecturer.
3 ACCREDITATION
On successful completion of the technical training
section of the course, the student shall be credited
with subjects 1A and 1B of the Vehicle Body Building
and Metal Fabrication apprenticeship course.
4 SUPPLEMENTARY PRACTICAL SKILLS
Factory and on-site visits should be undertaken when
available and relevant. On-site and on-campus real
work to be undertaken when relevant work available.
5 CERTIFICATE OF PRE-APPRENTICESHIP STUDIES
To be eligible for the Certificate of
Pre-Apprenticeship Studies the student must gain a
pass standard in each subject of the certificate.
6 NEW APPRENTICE TRAINING AND ASSESSMENT SCHEME (NATAS)
For an apprentice to be eligible for a
DEPARTMENT OF EMPLOYMENT AND TRAINING TRADE
CERTIFICATE, the apprentice must have achieved
the competencies as determined by the rules of the
appropriate Trade Training Schedule (TTS).
Achievement of College-listed competencies for each
apprentice, as listed in the TTS, is to be recorded
on the appropriate Trade Training Schedule
Assessment forms.
The Division of Industrial Training (DIT) will
require a completed College assessment report at the
conclusion of the apprentice's College training.
This report is to be forwarded to DIT prior to the
close of College business in the year of completion.
No information