Accredited course Outline
Date retreived
22/07/2026 11:24 AM AWST
22/07/2026 11:24 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Unspecified Code Career Start Certificate of Plastics (Cst)
Unspecified Code Career Start Certificate of Plastics (Cst)
Accredited course
National Code:
State Code:
3574
3574
TGA Status:
Draft
Draft
DTWD Status:
Approved
Approved
State Implementation and Classification
Approved Date
08/12/1994
Field of Education
030301 - Chemical Engineering
AQF Level
Unspecified Code
Nominal Hours
455
Duration
Unspecified
Stream of Study
Partial Exemption to "Other Skills" Course (3221)
Accredited Date
Expiry Date
VET Act Classifier
C
VET Act Conditions
Description
To provide a structured training framework for the development of Plastics
Industry Skills to Level 2 of the Australian Standard Framework.
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 31350 | TRB010 | Communication Skills | 36 | Module |
| 31349 | TRB009 | Functional Mathematics | 18 | Module |
| 31348 | TRB008 | Information Technology | 20 | Module |
| 31343 | TRB003 | Introduction to Quality Concepts | 20 | Module |
| 31344 | TRB004 | Introduction to Stores Procedures | 20 | Module |
| 31341 | TRB001 | Introduction to the Plastics Industry | 20 | Module |
| 31346 | TRB006 | Occupational Health and Safety | 20 | Module |
| 31340 | TRB016 | Personal Effectiveness Skills | 18 | Module |
| 31345 | TRB005 | Print Reading and Drawing | 20 | Module |
| 31347 | TRB007 | Work Environment | 20 | Module |
| 31342 | TRB002 | Workshop Practices | 35 | Module |
2. CORE
Composite Laminate Stream
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 31351 | TRB011 | Composite Laminates I: Spray/Lay Depositors | 60 | Module |
| 31352 | TRB012 | Composite Laminates II: Processes | 140 | Module |
3. CORE
Thermoforming and Fabrication Steam
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 31353 | TRB013 | Thermoforming and Fabrication | 200 | Module |
4. CORE
Extrusion Moulding Stream
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 31354 | TRB014 | Extrusion Processes | 200 | Module |
5. CORE
Cavity Moulding Stream
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 31355 | TRB015 | Cavity Moulding | 200 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C135 | PMB21098 | Certificate II in Process Manufacturing (Plastics-Composite Materials) | Qualification |
VET Info Notes
1 The certificate comprises sixteen modules. All students should begin
with the Introductory Module - 31341 Introduction to the Plastics Industry.
There is provision for recognition of prior learning and for extension modules.
2 In addition to the above subjects trainees will need to complete the
following subject:
31295 Preparation and Application for
Recognition of Prior Learning (RPL) 10.00
3 This course is recognised under the National Framework for Recognition
of Training (NFROT).
THIS COURSE HAS BEEN REPLACED BY SEVERAL QUALIFICATIONS. PLEASE REFER TO
TRAINING PACKAGE PMB98 FOR DETAILS.
with the Introductory Module - 31341 Introduction to the Plastics Industry.
There is provision for recognition of prior learning and for extension modules.
2 In addition to the above subjects trainees will need to complete the
following subject:
31295 Preparation and Application for
Recognition of Prior Learning (RPL) 10.00
3 This course is recognised under the National Framework for Recognition
of Training (NFROT).
THIS COURSE HAS BEEN REPLACED BY SEVERAL QUALIFICATIONS. PLEASE REFER TO
TRAINING PACKAGE PMB98 FOR DETAILS.
No information