Module Outline
Information current as of
18/10/2026 11:34 AM AWST
18/10/2026 11:34 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carpentry and Tool Skills
Carpentry and Tool Skills
Module
National Code
State Code
28303
28303
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
040311 - Carpentry And Joinery
Nominal Hours
108
Description
In order to maintain a satisfactory standard of
safety, the following protective measures should be
absolutely observed by all personnel:
- An apron or other suitable clothing should be worn in the
workshop.
- Stout leather boots or shoes must be worn at ALL times.
- When required, a safety hairnet or some suitable headcover
must be worn.
- Safety glasses and earmuffs must be worn when using
appropriate machines.
safety, the following protective measures should be
absolutely observed by all personnel:
- An apron or other suitable clothing should be worn in the
workshop.
- Stout leather boots or shoes must be worn at ALL times.
- When required, a safety hairnet or some suitable headcover
must be worn.
- Safety glasses and earmuffs must be worn when using
appropriate machines.
General notes
No information
Evidence Guide
Examination 75% Internal
Assessment 25%
Examination
One two-hour paper 75%
Internal Assessment
Practice 25%
Assessment 25%
Examination
One two-hour paper 75%
Internal Assessment
Practice 25%
Elements and Performance Criteria
No information
No information
Associated Qual/Courses