Module Outline
Date retreived
22/07/2026 2:50 PM AWST
22/07/2026 2:50 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Sheet Fed Offset Lithography 5
Sheet Fed Offset Lithography 5
Module
National Code
State Code
92519
92519
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
08/02/1996
Field of Education
030709 - Sheetmetal Working
Nominal Hours
40
Description
To investigate the lubrication and maintenance programs that must be applied to
sheetfed offset printing processes.
sheetfed offset printing processes.
No information
Evidence Guide
Internal Assessment 100%
Learning tasks may be assessed in a variety of ways including:
-written or oral assignment
-written or oral short answer questions
-successful completion of task sheets or check lists
-practical assessment will need demonstration of an understanding of issues
relating to lubrication and maintenance.
Learning tasks may be assessed in a variety of ways including:
-written or oral assignment
-written or oral short answer questions
-successful completion of task sheets or check lists
-practical assessment will need demonstration of an understanding of issues
relating to lubrication and maintenance.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3303 | Certificate III in Printing Machining | Accredited course |