Module Outline
Date retreived
22/07/2026 7:37 PM AWST
22/07/2026 7:37 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fitting and Machining App 2b
Fitting and Machining App 2b
Module
National Code
State Code
85399
85399
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
136
Description
To develop safe working practices in
the workshop.
To provide workshop practice, and
related theory, on the topics listed in
the Synopsis below.
the workshop.
To provide workshop practice, and
related theory, on the topics listed in
the Synopsis below.
No information
Evidence Guide
Examination 100%
Trade Technology - Written paper, two
hours 100 marks
Practical - Progressive assessment of
working procedures and practical
tests 100 marks
Trade Technology - Written paper will
consist of questions, governed by the
Trade Technology objectives, contained
in this document.
Practical Testing - Practical testing
and working procedure assessment, will
be governed by the practical
objectives, contained in this document.
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark.
To be eligible for the Certificate of
Trade Studies, the apprentice must
reach a pass standard in both the Trade
Technology Mark and the Practical Mark,
for each Semester Stage.
A Privileged Re-Examination
may be granted on the recommendation of
a Board of Review, when the practice
assessment is satisfactory.
Trade Technology - Written paper, two
hours 100 marks
Practical - Progressive assessment of
working procedures and practical
tests 100 marks
Trade Technology - Written paper will
consist of questions, governed by the
Trade Technology objectives, contained
in this document.
Practical Testing - Practical testing
and working procedure assessment, will
be governed by the practical
objectives, contained in this document.
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark.
To be eligible for the Certificate of
Trade Studies, the apprentice must
reach a pass standard in both the Trade
Technology Mark and the Practical Mark,
for each Semester Stage.
A Privileged Re-Examination
may be granted on the recommendation of
a Board of Review, when the practice
assessment is satisfactory.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2800 | First Class Machining | Accredited course | |
| 2840 | Fitting and Machining | Accredited course |