Module Outline
Information current as of
21/10/2026 12:11 AM AWST
21/10/2026 12:11 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Modelling App 3a (Fibrous Plaster)
Modelling App 3a (Fibrous Plaster)
Module
National Code
State Code
14274
14274
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
040317 - Plastering
Nominal Hours
80
Description
To provide students with study material
to further their knowledge in
specialized areas.
To encourage students to gain knowledge
in areas of the industry in which they
have not previously had experience.
To apply previously studied material to
a wider application.
To give the students an understanding
of safety regulations and an ability to
recognize potentially hazardous
situations.
to further their knowledge in
specialized areas.
To encourage students to gain knowledge
in areas of the industry in which they
have not previously had experience.
To apply previously studied material to
a wider application.
To give the students an understanding
of safety regulations and an ability to
recognize potentially hazardous
situations.
General notes
No information
Evidence Guide
Internal Assessment 100%
PER UNIT
THEORY
- Written Test Per Unit DRAWING
- Average percentage of nominated drawings' marks
CALCULATIONS
- Written Test Per Unit PRACTICAL SKILLS
- Average percentage of Practical Skills exercises marks
* Marks shall be out of 100 expressed as a percentage.
* Each component within a unit must attain a pass mark of
50. Failure may be redeemed by passing the individually based component
re-examination paper, prior to commencement of the next unit.
* The pass mark for a unit shall be the averaging of all
component marks.
Certificate of Trade Studies Subject Awarded
Marks
Composite Theory Mark will be calculated using the
following formula:
Block Release: Theory x 0.35 + Calculations x 0.35 +
Drawing 0.3
Privilege Re-Examination, Practical Skills
Re-assessment
A privilege re-examination or practical skills re-
assessment may be granted on the recommendation of a Board
of Review.
PER UNIT
THEORY
- Written Test Per Unit DRAWING
- Average percentage of nominated drawings' marks
CALCULATIONS
- Written Test Per Unit PRACTICAL SKILLS
- Average percentage of Practical Skills exercises marks
* Marks shall be out of 100 expressed as a percentage.
* Each component within a unit must attain a pass mark of
50. Failure may be redeemed by passing the individually based component
re-examination paper, prior to commencement of the next unit.
* The pass mark for a unit shall be the averaging of all
component marks.
Certificate of Trade Studies Subject Awarded
Marks
Composite Theory Mark will be calculated using the
following formula:
Block Release: Theory x 0.35 + Calculations x 0.35 +
Drawing 0.3
Privilege Re-Examination, Practical Skills
Re-assessment
A privilege re-examination or practical skills re-
assessment may be granted on the recommendation of a Board
of Review.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4778 | Wall and Ceiling Fixing (Modelling) | Accredited course |