Module Outline
Date retreived
22/07/2026 8:41 PM AWST
22/07/2026 8:41 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Automatic Transmission B
Automatic Transmission B
Module
National Code
State Code
13003
13003
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/05/1994
Field of Education
030503 - Vehicle Mechanics
Nominal Hours
34
Description
To enable the Automotive or Allied tradesperson to gain
knowledge and experience in the diagnostic and overhaul
procedures for two selected rear-wheel drive automatic
transmissions.
knowledge and experience in the diagnostic and overhaul
procedures for two selected rear-wheel drive automatic
transmissions.
No information
Evidence Guide
Examination 50%
Internal Assessment 50%
A pass in BOTH components is required.
Theory
A two-hour "open-book" examination will be conducted at
the end of the subject. Students will be expected to
utilise subject notes compiled during their study of
Automatic Transmission A and B to demonstrate their
understanding of the transmissions studied. 50%
Assignment
The assignments are to be set to cover or enhance areas
of importance that may not be examined. Where a topic
is of significance to the subject material, it should
be covered by an assignment or other suitable enhancement method. If more than
one assignment is set, the marks are to be averaged. 30%
Practical
Practical projects are to complement the theoretical
concepts. The practical assessment is to be based on
averaging all the practical projects that are set, to
reinforce the theory component. 20%
Internal Assessment 50%
A pass in BOTH components is required.
Theory
A two-hour "open-book" examination will be conducted at
the end of the subject. Students will be expected to
utilise subject notes compiled during their study of
Automatic Transmission A and B to demonstrate their
understanding of the transmissions studied. 50%
Assignment
The assignments are to be set to cover or enhance areas
of importance that may not be examined. Where a topic
is of significance to the subject material, it should
be covered by an assignment or other suitable enhancement method. If more than
one assignment is set, the marks are to be averaged. 30%
Practical
Practical projects are to complement the theoretical
concepts. The practical assessment is to be based on
averaging all the practical projects that are set, to
reinforce the theory component. 20%
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4628 | Automotive Engineering | Accredited course |