Module Outline

Date retreived
22/07/2026 12:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and configure an audio-visual system

Install and configure an audio-visual system

Module
National Code
VU23891
State Code
BB573
DTWD Status
Approved
State Implementation and Classification
Approved Date
21/10/2025
Field of Education
031317 - Electronic Equipment Servicing
Nominal Hours
60
Description
This unit describes the performance outcomes, skills and knowledge required to install and configure a residential audio-visual system.

It requires the ability to work safety, apply knowledge of amplification techniques, speaker technologies, wiring systems and cable types and applications and ensuring completed system meets the relevant standards and complies with installation and regulatory requirements.

The unit applies to a person working in an audio-visual environment.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
No information
No information
Elements and Performance Criteria
Prepare to install audio-visual components and systems
  • 1.1 Work health and safety (WHS)/Occupational health and safety (OHS) requirements and workplace procedures for relevant work area are identified, obtained and applied
  • 1.2 WHS/OHS risk control measures are followed in preparation for the work
  • 1.3 Nature and location of the work is obtained from relevant person/s to determine the scope of work
  • 1.4 Safety hazards which have not previously been identified are reported and advice on risk control measures is sought from the work supervisor
  • 1.5 Instructions for coordinating work with others is obtained from relevant person/s and applied
  • 1.6 Materials required for the work are determined in accordance with workplace procedures
  • 1.7 Tools, equipment and testing devices required for work are obtained and checked for correct operation and safety
Install audio/video components and systems
  • 2.1 Workplace risk control measures and procedures are applied
  • 2.2 Audio/video components are installed in accordance with relevant industry standards and job specifications with sufficient excess to affect terminations
  • 2.3 Accessories are installed straight and square in required locations within acceptable tolerances
  • 2.4 Cables and conductors are terminated at accessories in accordance with manufacturer specifications and regulatory requirements
  • 2.5 Unplanned events are reported to relevant person/s in accordance with workplace procedures
  • 2.6 Installation is conducted efficiently without waste of materials, damage to apparatus, circuits or the surrounding environment applying sustainable energy practices
Finalise installation work and report completion
  • 3.1 WHS/OHS work completion and risk control measures and procedures are followed
  • 3.2 Terminated cables are tested to ensure continuity and insulation resistance comply with requirements
  • 3.3 Completion of installation is reported to relevant person/s in accordance with workplace procedures
  • 3.4 Prepare instructions for a specific audience using clear language to convey operational details
No information
Associated Qual/Courses
State Code National Code Title Type
BHE71 22697VIC Certificate IV in Integrated Technologies Accredited course