Module Outline
Date retreived
22/07/2026 8:40 PM AWST
22/07/2026 8:40 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diagnosis of Starting, Charging and Ignition Systems
Diagnosis of Starting, Charging and Ignition Systems
Module
National Code
State Code
13011
13011
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/05/1994
Field of Education
030505 - Automotive Electrics And Electronics
Nominal Hours
34
Description
To teach tradespersons the skills necessary for
interpreting and applying service information
related to testing and diagnosing problems on a
variety of starting systems, charging systems, and
ignition systems.
interpreting and applying service information
related to testing and diagnosing problems on a
variety of starting systems, charging systems, and
ignition systems.
No information
Evidence Guide
Examination 50% Internal
Assessment 50%
A pass is required in BOTH components.
Theory
Written examination of two hours' duration. Questions are to be based on the
objectives contained in this syllabus. 50%
Assignment
The assignments are to be set to cover or enhance areas of importance that may
not be examined. Where a topic is of significance to the subject material, it
should be covered by an assignment or other suitable enhancement method. If
more than one assignment is set, the marks are to be
averaged. 20%
Practical
Practical projects are to complement the theoretical concepts. The practical
assessment is to be based on averaging all the practical projects that are set,
to reinforce the theory component. 30%
Assessment 50%
A pass is required in BOTH components.
Theory
Written examination of two hours' duration. Questions are to be based on the
objectives contained in this syllabus. 50%
Assignment
The assignments are to be set to cover or enhance areas of importance that may
not be examined. Where a topic is of significance to the subject material, it
should be covered by an assignment or other suitable enhancement method. If
more than one assignment is set, the marks are to be
averaged. 20%
Practical
Practical projects are to complement the theoretical concepts. The practical
assessment is to be based on averaging all the practical projects that are set,
to reinforce the theory component. 30%
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4628 | Automotive Engineering | Accredited course |