Module Outline
Date retreived
22/07/2026 2:28 PM AWST
22/07/2026 2:28 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Customised Painting Techniques
Customised Painting Techniques
Module
National Code
NAM 108
NAM 108
State Code
13184
13184
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
08/06/1995
Field of Education
030507 - Automotive Vehicle Refinishing
Nominal Hours
20
Description
To provide the learner with the necessary
knowledge and skills to plan, mark out and
apply various customised designs to a suitable
project panel adhering to all relevant
Occupational Health and Safety requirements.
knowledge and skills to plan, mark out and
apply various customised designs to a suitable
project panel adhering to all relevant
Occupational Health and Safety requirements.
Range of Variables
This module integrates theory and practice. An
emphasis on applying the theoretical principles
and processes in a simulated "on job" practical
situation is essential.
To demonstrate customised painting techniques.
Learners must apply the knowledge to practical
tasks, practising and developing the skills until
competence is achieved.
emphasis on applying the theoretical principles
and processes in a simulated "on job" practical
situation is essential.
To demonstrate customised painting techniques.
Learners must apply the knowledge to practical
tasks, practising and developing the skills until
competence is achieved.
Evidence Guide
Knowledge Short answer questions (written, oral or graphic, or multiple
choice, paper or computer based).
Practical Practical exercises which assesses the skills required of each
learning outcome, followed by a final practical exercise which assesses the
overall module purpose.
Learners must demonstrate competence in all
learning outcomes to the standard identified
within assessment criteria, while adhering to
state Occupational Health and Safety legislation
and Institute Policies and Regulations.
All the necessary subject related information will
be supplied, and learning outcomes will be
achieved without error and without assistance
(unless otherwise stated in the learning
outcome).
choice, paper or computer based).
Practical Practical exercises which assesses the skills required of each
learning outcome, followed by a final practical exercise which assesses the
overall module purpose.
Learners must demonstrate competence in all
learning outcomes to the standard identified
within assessment criteria, while adhering to
state Occupational Health and Safety legislation
and Institute Policies and Regulations.
All the necessary subject related information will
be supplied, and learning outcomes will be
achieved without error and without assistance
(unless otherwise stated in the learning
outcome).
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4677 | 4573 | Certificate III in Autobody Refinishing | Accredited course |
| 4683 | 50671 | Certificate III in Autobody Refinishing (fast Track) | Accredited course |