Module Outline
Date retreived
22/07/2026 2:30 PM AWST
22/07/2026 2:30 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fitting and Machining App 2a
Fitting and Machining App 2a
Module
National Code
State Code
85380
85380
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
144
Description
To develop safe working practices in
the workshop.
To provide the apprentice with theory
and practical instruction, on the
topics listed below.
the workshop.
To provide the apprentice with theory
and practical instruction, on the
topics listed below.
No information
Evidence Guide
Examination 100% Internal Practical Assessment 100%
Trade Theory - Written paper, 1.5-
hours 100 marks
Practice - three practical tests, four
hours each, as specified in the Stage 2
- Block A Practical Workbook.
Welding - Continuous practical
assessment.
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark.
To be eligible for the Certificate of
Trade Studies, the apprentice must
reach a pass standard in both the Trade
Technology Mark and the Practical Mark,
for each Semester Stage.
A Privileged Re-Examination may be
granted on the recommendation of a
Board of Review, when the practice
assessment is satisfactory.
Trade Technology Mark = Trade Theory
Mark
Formulae will be given to the students for examinations and practical tests,
unless the calculation is related to safe working conditions. In these cases,
the student will be expected to know the formulae.
Trade Practice
Practical Objectives are designated by
a "p", and are assessed as
satisfactory, unsatisfactory or not
attempted.
Trade Practice Mark = Percentage of Practical Objectives Achieved
Trade Theory - Written paper, 1.5-
hours 100 marks
Practice - three practical tests, four
hours each, as specified in the Stage 2
- Block A Practical Workbook.
Welding - Continuous practical
assessment.
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark.
To be eligible for the Certificate of
Trade Studies, the apprentice must
reach a pass standard in both the Trade
Technology Mark and the Practical Mark,
for each Semester Stage.
A Privileged Re-Examination may be
granted on the recommendation of a
Board of Review, when the practice
assessment is satisfactory.
Trade Technology Mark = Trade Theory
Mark
Formulae will be given to the students for examinations and practical tests,
unless the calculation is related to safe working conditions. In these cases,
the student will be expected to know the formulae.
Trade Practice
Practical Objectives are designated by
a "p", and are assessed as
satisfactory, unsatisfactory or not
attempted.
Trade Practice Mark = Percentage of Practical Objectives Achieved
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2800 | First Class Machining | Accredited course | |
| 3052 | Fitting and Machining | Accredited course | |
| 2840 | Fitting and Machining | Accredited course | |
| 2912 | Mechanical Fitting | Accredited course |