Module Outline
Date retreived
22/07/2026 7:37 PM AWST
22/07/2026 7:37 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Blacksmith-metal Fabricator Conversion Welding 2
Blacksmith-metal Fabricator Conversion Welding 2
Module
National Code
State Code
86606
86606
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
36
Description
To provide general principles, the
theoretical basis, and supplementary
practical experience, in the areas of
basic TIG, submerged welding,
metallurgy, and structural frames and
fasteners.
theoretical basis, and supplementary
practical experience, in the areas of
basic TIG, submerged welding,
metallurgy, and structural frames and
fasteners.
No information
Evidence Guide
Examination 30% Internal Practical Assessment 70%
Theory Examination
A one-hour objective test to be
conducted, on the completion of this
subject. Questions are to reflect the intent of the objectives, stated
in this document.
Practical Assessment
The practical assessment is to be on a
continuous basis, of all practical
projects, conducted during this
subject. The practical projects are to reflect the intent of the
practical objectives, stated in this document.
A pass must be obtained in each of the
theory and practical components, to
qualify in this subject.
A privileged re-assessment may be
offered for theory, where the practical
mark is satisfactory.
For consolidation, the material in this
module should be linked with, and
complemented by, relevant on-the-job
practice, or other equivalent
experience.
Theory Examination
A one-hour objective test to be
conducted, on the completion of this
subject. Questions are to reflect the intent of the objectives, stated
in this document.
Practical Assessment
The practical assessment is to be on a
continuous basis, of all practical
projects, conducted during this
subject. The practical projects are to reflect the intent of the
practical objectives, stated in this document.
A pass must be obtained in each of the
theory and practical components, to
qualify in this subject.
A privileged re-assessment may be
offered for theory, where the practical
mark is satisfactory.
For consolidation, the material in this
module should be linked with, and
complemented by, relevant on-the-job
practice, or other equivalent
experience.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2820 | Blacksmith-metal Fabricator Conversion | Accredited course |