Module Outline
Information current as of
17/10/2026 10:41 PM AWST
17/10/2026 10:41 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Patternmaking App 2a
Patternmaking App 2a
Module
National Code
State Code
85513
85513
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
144
Description
To provide foundation studies in the
Patternmaking trade.
To provide a theoretical basis,
skilling procedures, and safe working
practices, commonly found in the
Patternmaking trade, supplementary to
employer-provided work practice, and
on-the-job experience, in the Foundry
Industry.
Patternmaking trade.
To provide a theoretical basis,
skilling procedures, and safe working
practices, commonly found in the
Patternmaking trade, supplementary to
employer-provided work practice, and
on-the-job experience, in the Foundry
Industry.
General notes
No information
Evidence Guide
Examination 70% Internal Drawing Folio
Assessment 30%
Internal Practical Assessment 100%
Theory
One 1.5-hour Examination paper 100%
Calculations
One 1.5-hour Trade Calculations paper 100%
Drawing
Drawing Folio assessment 100%
Practical
Continuous cumulative assessment of nominated practical projects
100%
Certificate of Trade Studies
Awarded Marks
To be eligible for this Certificate, an
apprentice must reach a 50% pass
standard in the composite Theory mark
and Practical mark for each subject.
The composite Theory mark shall be
calculated by the following formula:
Theory Examination x 0.4 + Calculation
Examination x 0.3 + Drawing Assessment
x 0.3
Privileged Re-Examination
A privilege re-examination may be
granted on the recommendation of a
Board of Review, when the practical
assessment is satisfactory.
Assessment 30%
Internal Practical Assessment 100%
Theory
One 1.5-hour Examination paper 100%
Calculations
One 1.5-hour Trade Calculations paper 100%
Drawing
Drawing Folio assessment 100%
Practical
Continuous cumulative assessment of nominated practical projects
100%
Certificate of Trade Studies
Awarded Marks
To be eligible for this Certificate, an
apprentice must reach a 50% pass
standard in the composite Theory mark
and Practical mark for each subject.
The composite Theory mark shall be
calculated by the following formula:
Theory Examination x 0.4 + Calculation
Examination x 0.3 + Drawing Assessment
x 0.3
Privileged Re-Examination
A privilege re-examination may be
granted on the recommendation of a
Board of Review, when the practical
assessment is satisfactory.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2888 | Patternmaking | Accredited course |