Module Outline
Date retreived
22/07/2026 9:00 PM AWST
22/07/2026 9:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Select protection devices & systems for single & 3 phase low voltage circuits & installations
Select protection devices & systems for single & 3 phase low voltage circuits & installations
Module
National Code
ECGELE004A
ECGELE004A
State Code
AW873
AW873
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
08/02/2016
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Nominal Hours
35
Description
This unit is for holders of OTSR issued by an RTO and incorporated the minimum context gap to meet Australian standards and regulations.
No information
Evidence Guide
1. Prepare to arrange electrical installations circuits, control and protection.
1.1 WHS/OH&S procedures for a given work area are identified, obtained and understood.
1.2 WHS/OH&S risks are identified and established risk control measures and procedures in preparation for the work are followed.
1.3 Safety hazards, which have not previously been identified, are noted and established risk control measures are implemented.
1.4 The extent and nature and location of the work is determined from documentation or other appropriate person to establish the scope of work to be undertaken.
1.5 Load requirements for individual current-using equipment is determined from job specifications or from consultation with appropriate persons.
1.6 Material needed for the electrical installations circuits, control and protection work is obtained in accordance with established procedures and checked against job requirements.
1.7 Tools, equipment and testing devices needed to for the electrical installations circuits, control and protection work are obtained in accordance with established procedures and checked for correct operation and safety.
2. Arrange electrical installations circuits, control and protection.
2.1 WHS/OH&S risk control measures and procedures for carrying out the work are followed
2.2 The need to test or measure live is determined in strict accordance with WHS/OH&S requirements and when necessary conducted within established safety procedures.
2.3 Circuits/machines/plant are checked as being isolated where necessary in strict accordance WHS/OH&S requirements and procedures.
2.4 Circuits, control and protective devices are arranged to ensure safe and functional operation of the installation and to comply with technical standards and job specifications and requirements.
2.5 Earthing is arranged and terminated to comply with the MEN system requirements.
2.6 Protective devices are selected to meet the required switching and tripping currents, co-ordination and discrimination for overload and short-circuit protection.
2.7 Residual current devices are selected to meet the required circuit, switching and tripping currents required.
2.8 Switchgear/control gear is selected to meet current, voltage and IP ratings and functional requirements.
2.9 Switchboards are arranged to accommodate control and protective devices, links, safety services, and other distributor equipment in accordance with requirements.
2.10 Unexpected situations are dealt with safely and with the approval of an authorised person.
3. Completion and document and report electrical installation circuits, control and protection arrangements
3.1 WHS/OH&S work completion risk control measures and procedures are followed.
3.2 Work site is cleaned and made safe in accordance with established procedures.
3.3 Evidence is obtained from manufacturers/suppliers that electrical equipment selected complies with safety requirements.
3.4 Reasons for selections made, including calculations, are documented in accordance with established procedures.
3.5 Electrical installation arrangement and specifications for all selected items are documented in accordance with established procedures and forwarded to appropriate person(s).
1.1 WHS/OH&S procedures for a given work area are identified, obtained and understood.
1.2 WHS/OH&S risks are identified and established risk control measures and procedures in preparation for the work are followed.
1.3 Safety hazards, which have not previously been identified, are noted and established risk control measures are implemented.
1.4 The extent and nature and location of the work is determined from documentation or other appropriate person to establish the scope of work to be undertaken.
1.5 Load requirements for individual current-using equipment is determined from job specifications or from consultation with appropriate persons.
1.6 Material needed for the electrical installations circuits, control and protection work is obtained in accordance with established procedures and checked against job requirements.
1.7 Tools, equipment and testing devices needed to for the electrical installations circuits, control and protection work are obtained in accordance with established procedures and checked for correct operation and safety.
2. Arrange electrical installations circuits, control and protection.
2.1 WHS/OH&S risk control measures and procedures for carrying out the work are followed
2.2 The need to test or measure live is determined in strict accordance with WHS/OH&S requirements and when necessary conducted within established safety procedures.
2.3 Circuits/machines/plant are checked as being isolated where necessary in strict accordance WHS/OH&S requirements and procedures.
2.4 Circuits, control and protective devices are arranged to ensure safe and functional operation of the installation and to comply with technical standards and job specifications and requirements.
2.5 Earthing is arranged and terminated to comply with the MEN system requirements.
2.6 Protective devices are selected to meet the required switching and tripping currents, co-ordination and discrimination for overload and short-circuit protection.
2.7 Residual current devices are selected to meet the required circuit, switching and tripping currents required.
2.8 Switchgear/control gear is selected to meet current, voltage and IP ratings and functional requirements.
2.9 Switchboards are arranged to accommodate control and protective devices, links, safety services, and other distributor equipment in accordance with requirements.
2.10 Unexpected situations are dealt with safely and with the approval of an authorised person.
3. Completion and document and report electrical installation circuits, control and protection arrangements
3.1 WHS/OH&S work completion risk control measures and procedures are followed.
3.2 Work site is cleaned and made safe in accordance with established procedures.
3.3 Evidence is obtained from manufacturers/suppliers that electrical equipment selected complies with safety requirements.
3.4 Reasons for selections made, including calculations, are documented in accordance with established procedures.
3.5 Electrical installation arrangement and specifications for all selected items are documented in accordance with established procedures and forwarded to appropriate person(s).
Elements and Performance Criteria
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 75983 | EEOZAMCG06A | Select protection devices and systems for single and three phase low voltage circuits and electrical installations - AMCG | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AY780 | NAT10809004 | Select protection devices and systems for low voltage circuits and apparatus | Module |
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| YU04 | 10145NAT | Course in Electrician - Minimum Australian Context Gap | Accredited course |