Module Outline
Date retreived
22/07/2026 2:24 PM AWST
22/07/2026 2:24 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Mechanical Fitting App 3a
Mechanical Fitting App 3a
Module
National Code
State Code
85715
85715
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
144
Description
To develop safe working practice.
To develop an understanding of basic
electrical principles, as they relate
to pneumatics, hydraulics, electric
motors, motor-starters and process
control devices.
To develop an understanding of the
operating principles, for pressure,
temperature and flow-measuring devices,
relating these principles to basic
process control system theory.
To develop an understanding of fluid
power principles, and apply them in a
workshop situation, to the solution of
problems in pneumatics and hydraulics.
To develop skills, in relation to the
overhaul, sealing methods, operation
and basic flow measurement, for
roto-dynamic and positive displacement
water pumps.
To develop an understanding of basic
electrical principles, as they relate
to pneumatics, hydraulics, electric
motors, motor-starters and process
control devices.
To develop an understanding of the
operating principles, for pressure,
temperature and flow-measuring devices,
relating these principles to basic
process control system theory.
To develop an understanding of fluid
power principles, and apply them in a
workshop situation, to the solution of
problems in pneumatics and hydraulics.
To develop skills, in relation to the
overhaul, sealing methods, operation
and basic flow measurement, for
roto-dynamic and positive displacement
water pumps.
No information
Evidence Guide
Examination 100%
Internal Practical Assessment 100%
Trade Technology
One two-hour written paper will consist
of questions, governed by the Trade
Technology objectives in this
document. 100%
Practical Testing
Progressive practical testing and
working procedure assessment, will be
governed by the practical objectives
contained in this document. 100%
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark. To be eligible for
the Certificate of Trade Studies, the
apprentice must reach a pass standard
in both the Trade Technology Mark and
the Practical Mark for each Semester
Stage.
A Privileged Re-examination may be granted on the recommendation of a Board of
Review, when the practice assessment is satisfactory.
Internal Practical Assessment 100%
Trade Technology
One two-hour written paper will consist
of questions, governed by the Trade
Technology objectives in this
document. 100%
Practical Testing
Progressive practical testing and
working procedure assessment, will be
governed by the practical objectives
contained in this document. 100%
Certificate of Trade Studies
The Certificate percentage for each
Semester Stage, shall be the Trade
Technology Mark. To be eligible for
the Certificate of Trade Studies, the
apprentice must reach a pass standard
in both the Trade Technology Mark and
the Practical Mark for each Semester
Stage.
A Privileged Re-examination may be granted on the recommendation of a Board of
Review, when the practice assessment is satisfactory.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2912 | Mechanical Fitting | Accredited course |