Module Outline
Date retreived
22/07/2026 2:29 PM AWST
22/07/2026 2:29 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Mechanical Fitting App 2b
Mechanical Fitting App 2b
Module
National Code
State Code
85788
85788
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
136
Description
To develop safe working practices.
To solve problems in a workshop situation, that will
involve the fundamentals of fault analysis, machine
construction, machine installation and commissioning
procedures.
To solve problems in a workshop situation, that will involve the fundamentals
of fault analysis, construction, installation and commissioning procedures for
power transmission equipment.
To develop an understanding of the properties of
ferrous materials, commonly used in the Fitting
trade, and the methods used to control these
properties.
To solve problems in a workshop situation, that will
involve the fundamentals of fault analysis, machine
construction, machine installation and commissioning
procedures.
To solve problems in a workshop situation, that will involve the fundamentals
of fault analysis, construction, installation and commissioning procedures for
power transmission equipment.
To develop an understanding of the properties of
ferrous materials, commonly used in the Fitting
trade, and the methods used to control these
properties.
No information
Evidence Guide
Examination 100%
Internal Practical Assessment 100%
Trade Technology
One two-hour written paper will consist of
questions, governed by the Trade Technology
objectives contained in this document. 100%
Practical Testing
Progressive practical testing, and working procedure
assessment, will be governed by the practical
objectives contained in this document. 100%
Certificate of Trade Studies
The Certificate percentage for each Semester Stage,
shall be the Trade Technology Mark. To be eligible
for the Certificate of Trade Studies, the apprentice
must reach a pass standard in both the Trade
Technology Mark and the Practical Mark for each
Semester Stage.
A Privileged Re-Examination may be granted
on the recommendation of a Board of Review, when the
practice assessment is satisfactory.
Internal Practical Assessment 100%
Trade Technology
One two-hour written paper will consist of
questions, governed by the Trade Technology
objectives contained in this document. 100%
Practical Testing
Progressive practical testing, and working procedure
assessment, will be governed by the practical
objectives contained in this document. 100%
Certificate of Trade Studies
The Certificate percentage for each Semester Stage,
shall be the Trade Technology Mark. To be eligible
for the Certificate of Trade Studies, the apprentice
must reach a pass standard in both the Trade
Technology Mark and the Practical Mark for each
Semester Stage.
A Privileged Re-Examination may be granted
on the recommendation of a Board of Review, when the
practice assessment is satisfactory.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2912 | Mechanical Fitting | Accredited course |