Module Outline
Date retreived
22/07/2026 8:41 PM AWST
22/07/2026 8:41 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Metal Fabrication App 3b (Fab)
Metal Fabrication App 3b (Fab)
Module
National Code
State Code
85319
85319
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
030713 - Metal Casting And Patternmaking
Nominal Hours
72
Description
To provide apprentices with an understanding of the
Theoretical Principles of Trade Drawing, Trade
Calculations, Fabrication Techniques, Pipework Spool
Layouts - Drawing Interpretation and Fabrication.
Parallel line development and triangulation
development.
To supplement employer provided practical skills development in fabrication and
welding.
Theoretical Principles of Trade Drawing, Trade
Calculations, Fabrication Techniques, Pipework Spool
Layouts - Drawing Interpretation and Fabrication.
Parallel line development and triangulation
development.
To supplement employer provided practical skills development in fabrication and
welding.
No information
Evidence Guide
Examination 100% Internal Practical
Assessment 100%
Day Release
End of semester examinations in Fabrication and
Drawing modules.
Metal Fabrication 3B (Fab) Suggested
Hours
Fabrication Module F16 (Site Erection) 14 Drawing Module D9
(Pipe Fabrication) 12 Drawing Module D11 (Parallel
Line Development) 16
Drawing Module D12 (Transitions Development) 22
Stage 3B (Fab) Assessment/Tutorials 8
Examinations
Fabrication (Module F16) 30 minute objective examination
Drawing (inc Modules D9, D11, D12)
2 hour drawing examination 50%
Drawing folio 50%
Practical Assessment
Average percentage by continuous assessment of all
workshop components.
Certificate of Trade Studies (CTS)
To be eligible for the CTS an apprentice must obtain
a pass standard in the CTS percentage for each
stage.
The following formula is used to determine the CTS percent.
CTS % = 0.25 (Fabrication Theory) + 0.75 (Drawing)
Assessment 100%
Day Release
End of semester examinations in Fabrication and
Drawing modules.
Metal Fabrication 3B (Fab) Suggested
Hours
Fabrication Module F16 (Site Erection) 14 Drawing Module D9
(Pipe Fabrication) 12 Drawing Module D11 (Parallel
Line Development) 16
Drawing Module D12 (Transitions Development) 22
Stage 3B (Fab) Assessment/Tutorials 8
Examinations
Fabrication (Module F16) 30 minute objective examination
Drawing (inc Modules D9, D11, D12)
2 hour drawing examination 50%
Drawing folio 50%
Practical Assessment
Average percentage by continuous assessment of all
workshop components.
Certificate of Trade Studies (CTS)
To be eligible for the CTS an apprentice must obtain
a pass standard in the CTS percentage for each
stage.
The following formula is used to determine the CTS percent.
CTS % = 0.25 (Fabrication Theory) + 0.75 (Drawing)
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2826 | Metal Fabrication | Accredited course |