Module Outline
Date retreived
22/07/2026 6:15 PM AWST
22/07/2026 6:15 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Solid Plastering App 3b
Solid Plastering App 3b
Module
National Code
State Code
82263
82263
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
08/12/1994
Field of Education
040317 - Plastering
Nominal Hours
80
Description
To provide students with a structured range of
advanced skills.
To provide students with study material, to further
their knowledge in specialised areas.
To encourage students to gain knowledge in areas of
the industry, which they have not previously
experienced.
To apply previously studied material, to a wider application.
advanced skills.
To provide students with study material, to further
their knowledge in specialised areas.
To encourage students to gain knowledge in areas of
the industry, which they have not previously
experienced.
To apply previously studied material, to a wider application.
No information
Evidence Guide
Unit testing and continuous assessment
Per Unit
Theory - Written test (per unit) Drawing - Continuous
assessment Calculations - Written test (per unit Practical
Skills - Continuous assessment
* Marks shall be out of 100 expressed as a percentage.
* Each component within a unit must attain a pass mark of 50. Failure
may be redeemed by passing the individually-based component re- examination
paper, prior to commencement of the next unit.
* Drawing, Theory, Calculations - subject to a priviledged examination.
* The passmark for a unit shall be the averaging of all components'
marks.
* The certificate of trade studies shall be awarded on the successful
completion of a minimum of 18 units.
Privileged Re-Examination, Practical Skills Re-
Assessment
A privileged re-examination or practical skills re-
assessment may be granted on the recommendation of a
Board of Review.
Per Unit
Theory - Written test (per unit) Drawing - Continuous
assessment Calculations - Written test (per unit Practical
Skills - Continuous assessment
* Marks shall be out of 100 expressed as a percentage.
* Each component within a unit must attain a pass mark of 50. Failure
may be redeemed by passing the individually-based component re- examination
paper, prior to commencement of the next unit.
* Drawing, Theory, Calculations - subject to a priviledged examination.
* The passmark for a unit shall be the averaging of all components'
marks.
* The certificate of trade studies shall be awarded on the successful
completion of a minimum of 18 units.
Privileged Re-Examination, Practical Skills Re-
Assessment
A privileged re-examination or practical skills re-
assessment may be granted on the recommendation of a
Board of Review.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 1449 | Certificate III in Solid Plastering | Accredited course |