Module Outline
Date retreived
22/07/2026 12:25 PM AWST
22/07/2026 12:25 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Blacksmith-metal Fabricator Conversion Welding 1
Blacksmith-metal Fabricator Conversion Welding 1
Module
National Code
State Code
86605
86605
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/10/1994
Field of Education
030711 - Boilermaking And Welding
Nominal Hours
36
Description
To provide general principles, the
theoretical basis, and supplementary
practical experience, in the areas of
Gas Metal Arc-Welding equipment, safety
and techniques.
theoretical basis, and supplementary
practical experience, in the areas of
Gas Metal Arc-Welding equipment, safety
and techniques.
No information
Evidence Guide
Examination 30% Internal Practical Assessment 70%
Theory Examination
A one-hour objective test, to be
conducted on the completion of this
subject. Questions are to reflect the intent of the objectives, stated
in this document.
Practical Assessment
The practical assessment is to be on a
continuous basis, of all practical
projects conducted, during this
subject. The practical projects are to reflect the intent of the
practical objectives stated in this document.
A pass must be obtained in each of the
theory and practical components, to
qualify in this subject.
A privileged re-assessment may be
offered for theory, where the practical
mark is satisfactory.
For consolidation, the material in this
module should be linked with, and
complemented by, relevant on-the-job
skill practice, or other equivalent
experience.
Theory Examination
A one-hour objective test, to be
conducted on the completion of this
subject. Questions are to reflect the intent of the objectives, stated
in this document.
Practical Assessment
The practical assessment is to be on a
continuous basis, of all practical
projects conducted, during this
subject. The practical projects are to reflect the intent of the
practical objectives stated in this document.
A pass must be obtained in each of the
theory and practical components, to
qualify in this subject.
A privileged re-assessment may be
offered for theory, where the practical
mark is satisfactory.
For consolidation, the material in this
module should be linked with, and
complemented by, relevant on-the-job
skill practice, or other equivalent
experience.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2820 | Blacksmith-metal Fabricator Conversion | Accredited course | |
| 9352 | Engineering | Accredited course | |
| 9353 | Engineering | Accredited course | |
| 8969 | 1153 | Certificate IV in Engineering | Accredited course |
| 8970 | 1154 | Diploma of Engineering | Accredited course |