Module Outline
Information current as of
19/10/2026 6:02 AM AWST
19/10/2026 6:02 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Jewellery App 1a
Jewellery App 1a
Module
National Code
State Code
97697
97697
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
100307 - Jewellery Making
Nominal Hours
136
Description
To introduce students to a range of
basic jewellery skills.
To inculcate sound safety practices.
To develop basic drawing skills for
jewellery.
basic jewellery skills.
To inculcate sound safety practices.
To develop basic drawing skills for
jewellery.
General notes
No information
Evidence Guide
Internal Assessment 100%
Theory Examination
One two-hour end-of-subject
examination 25%
Practical Assessment
Based on projects completed throughout
the subject 50%
Drawing Assessment
Based on drawing projects completed
throughout the
subject 25%
Certificate of Trade Studies
(CTS)
To be eligible for the CTS, an apprentice must obtain a pass standard in the
CTS percentage, for each stage.
The following formula is used, to
determine the CTS percent:
CTS % = 0.25 (Theory) + 0.25 (Drawing)
+ 0.5 (Practical) = 100%
Theory Examination
One two-hour end-of-subject
examination 25%
Practical Assessment
Based on projects completed throughout
the subject 50%
Drawing Assessment
Based on drawing projects completed
throughout the
subject 25%
Certificate of Trade Studies
(CTS)
To be eligible for the CTS, an apprentice must obtain a pass standard in the
CTS percentage, for each stage.
The following formula is used, to
determine the CTS percent:
CTS % = 0.25 (Theory) + 0.25 (Drawing)
+ 0.5 (Practical) = 100%
Elements and Performance Criteria
No information