Module Outline
Date retreived
23/07/2026 5:20 AM AWST
23/07/2026 5:20 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Blacksmith-metal Fabricator Conversion Fabrication 2
Blacksmith-metal Fabricator Conversion Fabrication 2
Module
National Code
State Code
86608
86608
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
36
Description
To provide general principles, the
theoretical basis, and supplementary
practical experience, in the areas of
Aluminium and Stainless Steel Welding
and Fabrication, as well as general
building framework and site erection.
theoretical basis, and supplementary
practical experience, in the areas of
Aluminium and Stainless Steel Welding
and Fabrication, as well as general
building framework and site erection.
No information
Evidence Guide
Examination 30% Internal Practical Assessment 70%
Theory Examination
A one-hour objective test to be
conducted on the completion of this
subject. Questions are to reflect the intent of the objectives, stated
in this document.
Practical Assessment
The practical assessment is to be on a
continuous basis of all practical
projects conducted during this subject.
The practical projects are to reflect
the intent of the practical objectives
stated in this document.
A pass must be obtained in each of the
theory and practical components, to
qualify in this subject.
A privileged re-assessment may be
offered for theory, where the practical
mark is satisfactory.
For consolidation, the material in this
module should be linked with, and
complemented by, relevant on-the-job
skill practice, or other equivalent
experience.
Theory Examination
A one-hour objective test to be
conducted on the completion of this
subject. Questions are to reflect the intent of the objectives, stated
in this document.
Practical Assessment
The practical assessment is to be on a
continuous basis of all practical
projects conducted during this subject.
The practical projects are to reflect
the intent of the practical objectives
stated in this document.
A pass must be obtained in each of the
theory and practical components, to
qualify in this subject.
A privileged re-assessment may be
offered for theory, where the practical
mark is satisfactory.
For consolidation, the material in this
module should be linked with, and
complemented by, relevant on-the-job
skill practice, or other equivalent
experience.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2820 | Blacksmith-metal Fabricator Conversion | Accredited course |