Module Outline
Information current as of
20/10/2026 7:22 PM AWST
20/10/2026 7:22 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Modelling App 3b (Fibrous Plaster)
Modelling App 3b (Fibrous Plaster)
Module
National Code
State Code
14275
14275
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
80
Description
To provide students with study material to further
their knowledge in specialized areas.
To encourage students to gain knowledge in areas of
the industry in which they have not previously had
experience.
To apply previously studied material to a wider application.
To give the students an understanding of safety
regulations and an ability to recognize potentially
hazardous situations.
their knowledge in specialized areas.
To encourage students to gain knowledge in areas of
the industry in which they have not previously had
experience.
To apply previously studied material to a wider application.
To give the students an understanding of safety
regulations and an ability to recognize potentially
hazardous situations.
General notes
No information
Evidence Guide
Examination 100%
PER UNIT
THEORY
- Written Test Per Unit DRAWING
- Average percentage of nominated drawings' marks CALCULATIONS
- Written Test
Per Unit
PRACTICAL SKILLS
- Average percentage of Practical Skills exercises marks
* Marks shall be out of 100 expressed as a percentage
* Each component within a unit must attain a pass mark of 50. Failure may be redeemed by passing the individually based component re-examination paper, prior to commencement of the next unit.
* The pass mark for a unit shall be the averaging of all component marks.
Certificate of Trade Studies Subject Awarded
Marks
Composite Theory Mark will be calculated using the following formula:
Block Release: Theory x 0.35 + Calculations x 0.35 +
Drawing 0.3
Privilege Re-Examination, Practical Skills
Re-assessment
A privilege re-examination or practical skills re-assessment may be granted on
the recommendation of a Board of Review.
PER UNIT
THEORY
- Written Test Per Unit DRAWING
- Average percentage of nominated drawings' marks CALCULATIONS
- Written Test
Per Unit
PRACTICAL SKILLS
- Average percentage of Practical Skills exercises marks
* Marks shall be out of 100 expressed as a percentage
* Each component within a unit must attain a pass mark of 50. Failure may be redeemed by passing the individually based component re-examination paper, prior to commencement of the next unit.
* The pass mark for a unit shall be the averaging of all component marks.
Certificate of Trade Studies Subject Awarded
Marks
Composite Theory Mark will be calculated using the following formula:
Block Release: Theory x 0.35 + Calculations x 0.35 +
Drawing 0.3
Privilege Re-Examination, Practical Skills
Re-assessment
A privilege re-examination or practical skills re-assessment may be granted on
the recommendation of a Board of Review.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4778 | Wall and Ceiling Fixing (Modelling) | Accredited course |