Module Outline
Date retreived
22/07/2026 10:08 PM AWST
22/07/2026 10:08 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Power Hydraulics C
Power Hydraulics C
Module
National Code
State Code
13382
13382
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/05/1994
Field of Education
Nominal Hours
34
Description
To teach tradespersons, technicians and
para-professionals the principles of
operation, and application of
electroncially-controlled proportional
valves and servo valves.
To develop an indepth approach to
circuit design, incorporating the
abovementioned valves and hybrid
hydraulic/pneumatic systems, using
various control media, including the
principles of fluidics and moving part
logic.
para-professionals the principles of
operation, and application of
electroncially-controlled proportional
valves and servo valves.
To develop an indepth approach to
circuit design, incorporating the
abovementioned valves and hybrid
hydraulic/pneumatic systems, using
various control media, including the
principles of fluidics and moving part
logic.
No information
Evidence Guide
Examination 80% Internal Assignment Assessment 20%
A pass in BOTH components is
required.
Theory
Written examination of two hours' duration. Questions are to be based on the
objectives contained in this syllabus. 80%
Assignment
The assignments are to be set to cover or enhance areas of importance that may
not be examined. Where a topic is of significance to the subject material, it
should be covered by an assignment or other suitable enhancement method. If
more than one assignment is set, the marks are to be averaged.
A pass in BOTH components is
required.
Theory
Written examination of two hours' duration. Questions are to be based on the
objectives contained in this syllabus. 80%
Assignment
The assignments are to be set to cover or enhance areas of importance that may
not be examined. Where a topic is of significance to the subject material, it
should be covered by an assignment or other suitable enhancement method. If
more than one assignment is set, the marks are to be averaged.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4628 | Automotive Engineering | Accredited course |