Pathway Outline
Date retreived
22/07/2026 7:48 PM AWST
22/07/2026 7:48 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Robotics Control Systems
Robotics Control Systems
Pathway
National Code
—
—
State Code
AB91
AB91
DTWD Status
Approved
Approved
Accreditation, State Implementation and Classification
Approved Date
14/07/2020
14/07/2020
Field of Education
0313 - Electrical And Electronic Engineering And Technology
0313 - Electrical And Electronic Engineering And Technology
Stream of Study
Duration
1 Semester
Nominal Hours
408
408
Accredited Date
—
—
Expiry Date
—
—
Description
This is a pre-vocational course which will prepare learners with the knowledge and skills required to work in various technical roles in industries where there is an integration of technologies.
Packaging Rules
To be awarded the Certificate II in Integrated Technologies (Pre-vocational) participants are required to complete a minimum of ten (10) units consisting of:
- seven (7) core units
- three (3) elective units
The elective units:
- may be chosen from any streams
- where a unit appears in more than one stream it can only be counted once
- up to two (2) of the elective units can be replaced with other training package or accredited course units provided each unit is consistent with the vocational outcomes and does not jeopardise the AQF integrity of this course.
Learners who do not successfully complete all required units will be issued with a Statement of Attainment listing those units they have completed.
- seven (7) core units
- three (3) elective units
The elective units:
- may be chosen from any streams
- where a unit appears in more than one stream it can only be counted once
- up to two (2) of the elective units can be replaced with other training package or accredited course units provided each unit is consistent with the vocational outcomes and does not jeopardise the AQF integrity of this course.
Learners who do not successfully complete all required units will be issued with a Statement of Attainment listing those units they have completed.
1. Core Units
All seven (7) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AY870 | VU22821 | Apply electrotechnology knowledge and skills in integrated technologies work | 80 | Module |
| S7307 | UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | 18 | Unit of competency |
| AY866 | VU22324 | Build a simple network and establish end to end connectivity | 80 | Module |
| AY872 | VU22823 | Carry out an integrated technologies project | 60 | Module |
| AY868 | VU22819 | Prepare to work in an integrated technologies environment | 20 | Module |
| AY871 | VU22822 | Use CAD software applications in integrated technologies work | 20 | Module |
| AY869 | VU22820 | Use routine work practices in an integrated technologies environment | 40 | Module |
2. Robotics Control Stream
Three units to be chosen from the units listed below.
Please refer to the packaging rules for the full details of available options.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AY793 | VU22338 | Configure and program a basic robotic system | 60 | Module |
| AY794 | VU22674 | Explore applications and operation of the Internet of Things (IoT) | 20 | Module |
| AY876 | VU22827 | Implement a digital circuit using a programmable logic device (PLD) | 30 | Module |
| AY878 | VU22829 | Install, set up and test an imbedded control system | 30 | Module |
| AY877 | VU22828 | Install, test and verify correct operation of a "by-wire" control system | 30 | Module |
| AY867 | VU22340 | Use 3D printing to create products | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AB59 | Robotics Control Systems | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AD16 | Robotics Control Stream | Pathway |
Note
No information
Entry Requirements
There are no essential entry requirements for this course. However, learners are best equipped to achieve the course outcomes if they have as a minimum, language, literacy and numeracy skills that are equivalent to Level 2 of the Australian Core Skill Framework. Details can be found on website: http://www.acsf.deewr.gov.au
Learners with language, literacy and numeracy skills at levels lower than suggested above may require additional support to successfully undertake this course
Learners with language, literacy and numeracy skills at levels lower than suggested above may require additional support to successfully undertake this course