Pathway Outline

Date retreived
22/07/2026 12:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Pre Apprentice (Family of Trades)

Pre Apprentice (Family of Trades)

Pathway
National Code
State Code
MS87
DTWD Status
Replaced
Associated Qualification
Certificate I in Engineering
National Code
MEM10198
State Code
M001
TGA Status
Deleted
DTWD Status
Archived
National Endorsed, State Implementation and Classification
Original TGA Release Date
21/10/1998
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
12/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
Duration
Unspecified
Current Release Version
1.00
Current Release Date
21/10/1998
Nominal Hours
600
Description
Packaging Rules
1.
GENERAL CORE * Units updated. NEW STUDENTS enrolling in or after 2002 must select B competencies or higher where superceeding earlier lower alpha versions.
State Code National Code Title Hours Type
M0202 MEM1.2FA Apply principles of Occupational Health & Safety in work environment 1 Unit of competency
M0203 MEM1.3FA Apply quality procedures 1 Unit of competency
M0333 MEM9.1AA Draw and interpret sketch 18 Unit of competency
M0334 MEM9.2AA Interpret technical drawing 36 Unit of competency
M0209 MEM2.5C11A Measure with graduated devices 18 Unit of competency
M0212 MEM2.8C10A Perform computations 18 Unit of competency
M0211 MEM2.7C10A Perform computations - basic 18 Unit of competency
M0204 MEM1.4FA Plan to undertake a routine task 1 Unit of competency
M0201 MEM1.1FA Undertake interactive workplace communication 1 Unit of competency
M0410 MEM18.1AA Use hand tools 18 Unit of competency
M1356 MEM18.1AB Use hand tools 18 Unit of competency
M0411 MEM18.2AA Use power tools/hand held operations 18 Unit of competency
2.
TRADE SPECIFIC UNITS
Learner to select electives up to a total of 54 hours. * Units updated. NEW STUDENTS enrolling in or after 2002 must select B competencies or higher where superceeding earlier lower alpha versions. Additional units have been added from the Automotive Training Package October 2002.
State Code National Code Title Hours Type
W1510 AUR17606B Balance tyres/wheels 8 Unit of competency
E1000 AUR00108A Carry out maintenance and/or component servicing operations 18 Unit of competency
M0250 MEM5.5AA Carry out mechanical cutting 18 Unit of competency
E1105 AUR18708A Carry out minor repairs to electrical circuit/systems 28 Unit of competency
M0378 MEM12.2AA Electrical/electronic measurement 18 Unit of competency
W1346 AUR70125B Follow workplace Occupational Health and Safety requirements 18 Unit of competency
M1350 MEM5.7AB Manual heating and thermal cutting 18 Unit of competency
M0252 MEM5.7AA Manual heating, thermal cutting and gouging 18 Unit of competency
M0251 MEM5.6AA Perform brazing and/or silver soldering 18 Unit of competency
M0289 MEM7.5AA Perform general machining 72 Unit of competency
M0257 MEM5.12AA Perform routine manual arc and/or gas metal arc welding 36 Unit of competency
M1755 MEM5.12AB Perform routine manual metal arc welding 18 Unit of competency
M0434 MEM18.25AA Service combustion engines 18 Unit of competency
W1514 AUR18676B Test, service and replace batteries 12 Unit of competency
M0315 MEM7.32AA Use workshop machines for basic operations 18 Unit of competency
3.
SKILLS PRACTICE The Family of Trades has been modified to suit a range of regional needs and as such have alternative modules related to automotive within this group. The overall funding will remain at 600 hours for the total course, 200 hours from this group, unless specifly approved by the WADT. Therefore the selection of automotive modules needs to meet the client requirement and the overall hours requirements. Selection of the appropriate modules to meet the outcomes will be an RTO responsiblity.
State Code National Code Title Hours Type
Y0235 Supervised Skills Practice 1 (Mft) 40 Module
Y0082 Supervised Skills Practice 1 (Mvl) 40 Module
Y0236 Supervised Skills Practice 2 (Mft) 40 Module
Y0083 Supervised Skills Practice 2 (Mvl) 40 Module
Y0237 Supervised Skills Practice 3 (Mft) 40 Module
Y0084 Supervised Skills Practice 3 (Mvl) 40 Module
Y0238 Supervised Skills Practice 4 (Mft) 40 Module
Y0085 Supervised Skills Practice 4 (Mvl) 40 Module
Y0239 Supervised Skills Practice 5 (Mft) 40 Module
Y0240 Workplace Placement 1 (Mft) 40 Module
Y0086 Workplace Placement 1 (Mvl) 40 Module
Y0241 Workplace Placement 2 (Mft) 40 Module
Y0249 Workplace Placement 2 (Mvl) 40 Module
Y0242 Workplace Placement 3 (Mft) 40 Module
Y0250 Workplace Placement 3 (Mvl) 40 Module
Y0243 Workplace Placement 4 (Mft) 40 Module
Y0251 Workplace Placement 4 (Mvl) 40 Module
Y0244 Workplace Placement 5 (Mft) 40 Module
Y0252 Workplace Placement 5 (Mvl) 40 Module
No information
Note
No information
No information
No information