Pathway Outline
Date retreived
22/07/2026 1:23 PM AWST
22/07/2026 1:23 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Heavy Vehicle Mobile Equipment
Heavy Vehicle Mobile Equipment
Pathway
National Code
—
—
State Code
WT66
WT66
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
13/01/2006
13/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
5 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
1099
1099
Description
WT66 is a pathway of the Certificate III in Automotive - Mechanical AUR30405. This training program that leads to the completion of Heavy Vehicle Mobile Equipment.
Packaging Rules
1. Compulsory Units
The following three (3) units of competence are compulsory:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5084 | AURT366108A | Carry out diagnostic procedures | 30 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
2. Mandatory Technical Inventory
There are twelve (12) units of competence that are COMPULSORY to the Heavy Vehicle Mobile Equipment pathway. Plus one (1) unit, made up of either AURTH306666A or AURTH307166A.
3. Elective Technical Inventory
The remaining thirteen (13) units of competence must be selected from the Technical Inventory from the AUR05 Automotive Retail, Service and Repair Training Package. These thirteen (13) units of competence are designated as ELECTIVE may be substituted by referring to the qualification structuring rules.
4. Electives
Six (6) units of competence may be selected from the AUR05 Automotive Retail, Service and Repair Training Package or any endorsed Training Package that meet the needs of the enterprise, must be achieved.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5050 | AURT305671A | Inspect and repair engine forced induction systems | 24 | Unit of competency |
| WA172 | MEM550B | Perform routine gas metal arc welding | 18 | Unit of competency |
| W9832 | AURTH316166A | Repair suspension systems (heavy vehicle) | 40 | Unit of competency |
| W5074 | AURT322666A | Repair/retrofit air conditioning systems | 30 | Unit of competency |
| W5017 | AURT222670A | Service air conditioning systems | 20 | Unit of competency |
| W2883 | AURE321771A | Service and repair electronic compression ignition engine management systems | 45 | Unit of competency |
No information
Note
This training program was created on 03/08/2008, by METS CSSN as a pathway of AUR30405.
This qualification/pathway is copyright of DEEWR and should be consulted for full description of requirements
Further information on this program may be obtained by contacting METS CSSN on 08 9442 8307.
This qualification/pathway is copyright of DEEWR and should be consulted for full description of requirements
Further information on this program may be obtained by contacting METS CSSN on 08 9442 8307.
Entry Requirements
Not Applicable.
(AP02300) AUTOMOTIVE TECHNICIAN (HEAVY MOBILE EQUIPMENT)
Apprenticeship
Part-time is defined as a minimum of 20 hours per week.