Pathway Outline

Date retreived
22/07/2026 12:33 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Licensed Electrician

Licensed Electrician

Pathway
National Code
State Code
WS47
DTWD Status
Replaced
Associated Qualification
Certificate III in Engineering - Electrical/Electronic Trade
National Code
MEM30498
State Code
M007
TGA Status
Deleted
DTWD Status
Archived
National Endorsed, State Implementation and Classification
Original TGA Release Date
21/10/1998
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Approved Date
16/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
Duration
Unspecified
Current Release Version
1.00
Current Release Date
21/10/1998
Nominal Hours
864
Description
Packaging Rules
1.
All units in this group must be completed as part of the Licenced Electrical apprenticeship.

To meet the requirements of a licensed electrical outcome the following units of competence, which total 77 points, and the two modules relating to the capstone assessment, must be completed. An additional 19 points to total a minimum of 96 points are required for this qualification. These points can be made up by selecting competencies from specialisation streams in accordance with the training packacge guidelines. The total hours of delivery are 864 for this qualification.
State Code National Code Title Hours Type
M0202 MEM1.2FA Apply principles of Occupational Health & Safety in work environment 1 Unit of competency
M0203 MEM1.3FA Apply quality procedures 1 Unit of competency
M0205 MEM2.1C12A Apply quality systems 18 Unit of competency
M0208 MEM2.4C11A Assist in the provision of on the job training 18 Unit of competency
M0457 MEM18.49AA Disconnect/reconnect fixed wired equipment (which use up to 1000vAC/1500vDC) 27 Unit of competency
M0333 MEM9.1AA Draw and interpret sketch 18 Unit of competency
90353 NUE505A Electrical Systems Safety 9 Module
90318 NUE505B Electrical Systems Safety - Monitoring Competency Development 12 Module
M0378 MEM12.2AA Electrical/electronic measurement 18 Unit of competency
M0347 MEM10.4AA Enter and change programmable controller operational parameters 18 Unit of competency
M0456 MEM18.48AA Fault find and repair/rectify basic electrical circuits 90 Unit of competency
M0459 MEM18.51AA Fault find repair/rectify complex electrical circuits 54 Unit of competency
M0455 MEM18.46AA Fault find/repair electrical equipment/components which use up to 1000vAC/1500vDC 54 Unit of competency
M0346 MEM10.3AA Install and test electrical wiring and circuits (up to 1000vAC/1500vDC) 54 Unit of competency
M0334 MEM9.2AA Interpret technical drawing 36 Unit of competency
M0209 MEM2.5C11A Measure with graduated devices 18 Unit of competency
M0207 MEM2.3C11A Operate in a work based team environment 18 Unit of competency
M0206 MEM2.2C11A Organise and analyse information 18 Unit of competency
M0212 MEM2.8C10A Perform computations 18 Unit of competency
M0211 MEM2.7C10A Perform computations - basic 18 Unit of competency
M0213 MEM2.9C10A Perform computer operations 18 Unit of competency
M0384 MEM13.1AA Perform emergency first aid 9 Unit of competency
M0210 MEM2.6C10A Plan a complete activity 36 Unit of competency
M0204 MEM1.4FA Plan to undertake a routine task 1 Unit of competency
M0380 MEM12.4AA Precision electrical/electronic measurement 36 Unit of competency
M0345 MEM10.2AA Terminate and connect electrical wiring 27 Unit of competency
M0354 MEM10.11AA Terminate and connect specialist cables 18 Unit of competency
M0201 MEM1.1FA Undertake interactive workplace communication 1 Unit of competency
M0410 MEM18.1AA Use hand tools 18 Unit of competency
M0411 MEM18.2AA Use power tools/hand held operations 18 Unit of competency
No information
Note
No information
No information
No information