Pathway Outline
Date retreived
22/07/2026 4:48 AM AWST
22/07/2026 4:48 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pilot
Pilot
Pathway
National Code
—
—
State Code
WS73
WS73
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
27/02/2003
27/02/2003
Field of Education
0315 - Aerospace Engineering And Technology
0315 - Aerospace Engineering And Technology
Approved Date
18/08/2005
18/08/2005
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
27/02/2003
27/02/2003
Nominal Hours
960
960
Description
This qualification provides you with the theoretical and practical knowledge for the Commercial Pilot profession. A commercial pilot flies in command of single pilot aircraft. For a Commercial Pilot's Licence, 150 hours flying time is required. You must also pass a specialised Class 2 medical examination. You will learn about aircrafts, human performance and limitations in aviation, aerodynamics, meteorology, airplane performance, navigation, flight rules and air law
Packaging Rules
1.
To achieve this pathway all units must be completed.
Certificate I level units
Certificate I level units
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S2261 | TDTI297C | Apply customer service skills | 20 | Unit of competency |
| S2231 | TDTE597B | Carry out basic workplace calculations | 20 | Unit of competency |
| S2487 | TDTF297B | Conduct housekeeping activities | 20 | Unit of competency |
| S2483 | TDTF197B | Follow OHS procedures | 20 | Unit of competency |
| S2229 | TDTE397B | Participate in basic workplace communication | 40 | Unit of competency |
| S2446 | TDTD197B | Shift materials safely using manual handling methods | 20 | Unit of competency |
| S2585 | TDTG197B | Work effectively with others | 40 | Unit of competency |
2.
Certificate II level units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S2476 | TDTF1097B | Apply fatigue management strategies | 30 | Unit of competency |
| W1952 | TDAF1003A | Implement regulations and policies during aircraft safety and service operations | 20 | Unit of competency |
| S2589 | TDTG701A | Work in a socially diverse environment | 20 | Unit of competency |
3.
Certificate III level units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W1957 | TDAF503A | Maintain the safety of people and aircraft | 30 | Unit of competency |
| W1942 | TDAB403A | Manage and carry out pre- and post-flight cabin checks | 20 | Unit of competency |
| S2582 | TDTO798B | Undertake emergency response action to a security threat | 20 | Unit of competency |
4.
Certificate IV level units.
No information
Note
This training program was created on 28/2/2007, by Swan TAFE as a pathway of TDA40203.
This qualification/pathway is copyright of DEST and should be consulted for full description of requirements
Further information on this program may be obtained by contacting Terence Wilson on 08 9442 8312.
This qualification/pathway is copyright of DEST and should be consulted for full description of requirements
Further information on this program may be obtained by contacting Terence Wilson on 08 9442 8312.
No information