Pathway Outline
Date retreived
22/07/2026 3:37 PM AWST
22/07/2026 3:37 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Automotive Electrical
SAL Kickstart Pre-Apprenticeship - Automotive Electrical
Pathway
National Code
—
—
State Code
WB01
WB01
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
09/06/2009
09/06/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Automotive Electrical Pathway WB01 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20408.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Automotive Electrical Pathway WB01 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20408.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W2862 | AURE224008A | Carry out soldering of electrical wiring/circuits | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
2. TECHNICAL INVENTORY UNITS
Complete the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2854 | AURE218708A | Carry out repairs to single electrical circuits | 20 | Unit of competency |
| W2980 | AURT201170A | Inspect and service engines | 20 | Unit of competency |
| W2857 | AURE219431A | Install, test and repair electrical security systems/components | 20 | Unit of competency |
| W2856 | AURE219331A | Install, test and repair low voltage wiring/lighting systems | 20 | Unit of competency |
| W2859 | AURE220140A | Manufacture and repair wiring harness/looms | 55 | Unit of competency |
| W2851 | AURE218664A | Remove and replace electrical/electronic units/assemblies | 20 | Unit of competency |
| W2853 | AURE218676A | Test, service and charge batteries | 20 | Unit of competency |
3. ELECTIVE UNITS
Complete 3 (three) elective units. The following is one example of units that may be selected. The AUR05 Automotive Industry Retail, Service and Repair Training Package should be consulted for further information on the selection of elective units. Total hours for the training program should not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5017 | AURT222670A | Service air conditioning systems | 20 | Unit of competency |
| W5022 | AURT225667A | Use and maintain measuring equipment | 16 | Unit of competency |
| W5025 | AURT270278A | Use and maintain workplace tools and equipment | 20 | Unit of competency |
4. WORK PLACEMENT MODULES
Complete the following modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA31 | Pre-Apprenticeship (Automotive Electrical) | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification AUR20408 Certificate II in Automotive Electrical Technology on 11 August 2010.
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section **
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section **
Entry Requirements
Not Applicable
