Pathway Outline
Date retreived
22/07/2026 9:17 AM AWST
22/07/2026 9:17 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprentice (Vehicle Body - Panel Beating)
Pre-Apprentice (Vehicle Body - Panel Beating)
Pathway
National Code
—
—
State Code
WT04
WT04
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
13/01/2006
13/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
600
600
Description
This pathway has been replaced by WA15 Pre-apprenticeship (Vehicle Body - Panel Beating)
Packaging Rules
1.
CORE - ALL units to be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W2821 | AURC172003A | Identify environmental regulations and best practice in a workplace or business | 16 | Unit of competency |
2.
PANEL BEATING - the following units are to be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5254 | AURV281108A | Carry out manual metal arc welding procedures | 20 | Unit of competency |
| W2975 | AURT100308A | Carry out workshop practice activities | 36 | Unit of competency |
| C3513 | BSBCMN102A | Complete daily work activities | 20 | Unit of competency |
| M1754 | MEM5.4AB | Perform routine oxy acetylene welding | 18 | Unit of competency |
| C3512 | BSBCMN101A | Prepare for work | 30 | Unit of competency |
| W5150 | AURV100064A | Remove and tag vehicle body system components | 22 | Unit of competency |
| W5154 | AURV226864A | Remove, replace and realign bolt-on panels, sections and fittings | 58 | Unit of competency |
3.
SUPERVISED SKILLS PRACTICE - ALL modules to be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0107 | Supervised Skills Practice 1 (Vbb) | 40 | Module | |
| Y0108 | Supervised Skills Practice 2 (Vbb) | 40 | Module | |
| Y0109 | Supervised Skills Practice 3 (Vbb) | 40 | Module | |
| Y0110 | Supervised Skills Practice 4 (Vbb) | 40 | Module |
4.
WORK PLACEMENT - ALL modules to be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0111 | Workplace Placement 1 (Vbb) | 40 | Module | |
| Y0269 | Workplace Placement 2 (Vbb) | 40 | Module | |
| Y0270 | Workplace Placement 3 (Vbb) | 40 | Module | |
| Y0271 | Workplace Placement 4 (Vbb) | 40 | Module | |
| Y0272 | Workplace Placement 5 (Vbb) | 40 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA15 | Pre-Apprenticeship (Vehicle Body - Panel Beating) | Pathway |
Note
This pathway has been replaced by WA15 Pre-apprenticeship (Vehicle Body - Panel Beating).
This training program was created by the CSSN at Swan Tafe as a pathway of AUR10105.
This qualification/pathway is copyright of DEST and should be consulted for full description of requirements.
This training program was created by the CSSN at Swan Tafe as a pathway of AUR10105.
This qualification/pathway is copyright of DEST and should be consulted for full description of requirements.
Entry Requirements
Not Applicable
