Qualification Outline

Date retreived
22/07/2026 5:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Civil Construction (Foundation Work)

Certificate III in Civil Construction (Foundation Work)

Qualification
National Code:
BCC30407
State Code:
W336
TGA Status:
Deleted
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Original TGA Release Date
31/12/2003
Approved Date
18/04/2008
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
552
Duration
4 Semesters
Current Release Number
1.00
Current Release Date
31/12/2003
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 31/12/2003 Current Approved
Description
Schedule
Packaging Rules
25 Units

14 Core units
11 Elective units, of which 2 of these AQF3 units must be Foundation Work (FW) units
and between 5 and 9 must be AQF3 units

Note: Maximum of 1 elective may be substituted by selecting a competency unit from another qualification within the Civil Construction Training Package or from another relevant endorsed Training Package
1.

CORE All core units must be achieved.

State Code National Code Title Hours Type
W2072 BCCCM2008B Carry out basic levelling 8 Unit of competency
W2075 BCCCM2012B Carry out concrete work 36 Unit of competency
W2069 BCCCM2005B Carry out manual excavation 8 Unit of competency
W2063 BCCCM1004B Carry out measurements and calculations 16 Unit of competency
W2061 BCCCM1002B Conduct workplace communication 16 Unit of competency
W2077 BCCCM3002B Control construction site water table 20 Unit of competency
W2068 BCCCM2004B Drain and dewater site 12 Unit of competency
W2060 BCCCM1001B Follow OH&S policies & procedures 32 Unit of competency
W2064 BCCCM1005B Handle construction materials and safely dispose of non-toxic materials 16 Unit of competency
W2076 BCCCM2014B Identify, locate and protect underground services 24 Unit of competency
W2062 BCCCM1003B Plan and organise work 16 Unit of competency
W2067 BCCCM2003B Read and interpret plans and specifications 32 Unit of competency
W2071 BCCCM2007B Spread and compact materials manually 12 Unit of competency
W2065 BCCCM2001B Use civil construction hand and power tools 68 Unit of competency
W2066 BCCCM2002B Use small plant and equipment 16 Unit of competency
W1759 BCCCM2009B Work in confined spaces 24 Unit of competency
2.

ELECTIVES Nine (9) of the following elective units are to be selected. Of the nine electives: - a minimum of five (5) must be AQF3 units, and - two (2) of these AQF3 units must be Foundation Work (FW) units A maximum of one (1) elective may be substituted by selecting a competency unit from another qualification within the Civil Construction Training Package or from another relevant ebdorsed Training Package.

State Code National Code Title Hours Type
W2083 BCCFW3005B Bore cast in-situ piles 32 Unit of competency
W2079 BCCCM3005B Carry out site based risk control processes 12 Unit of competency
W2112 BCCRC3006B Conduct earthworks 68 Unit of competency
W1761 BCCCM3001B Construct and dismantle fences and gates 32 Unit of competency
W1763 BCCFW3001B Construct underpinning 52 Unit of competency
W1760 BCCCM2013B Control traffic with a stop-slow bat 4 Unit of competency
W1884 BCGSF2003B Cut and bend materials using Oxy/LPG equipment 20 Unit of competency
W2082 BCCFW3004B Drive piles 32 Unit of competency
W1762 BCCCM3003B Implement traffic management plan 16 Unit of competency
W2081 BCCFW3003B Install primary ground support 20 Unit of competency
W2080 BCCFW3002B Install temporary and permanent rock anchors 20 Unit of competency
W2073 BCCCM2010B Install trench support 8 Unit of competency
W2105 BCCRC2008B Lay pipes 32 Unit of competency
W2107 BCCRC3001B Maintain drainage systems 12 Unit of competency
W2078 BCCCM3004B Maintain site records 8 Unit of competency
W2098 BCCRC2001B Repair potholes 28 Unit of competency
W2070 BCCCM2006B Support plant operations 8 Unit of competency
W2065 BCCCM2001B Use civil construction hand and power tools 68 Unit of competency
W1819 BCGCM2007B Use explosive power tools (EPT) 8 Unit of competency
Replaces
State Code National Code Title Type
W126 BCC30403 Certificate III in Civil Construction (Foundation Work) Qualification
Replaced By
State Code National Code Title Type
W676 RII31209 Certificate III in Civil Foundations Qualification
VET Info Notes
This training program is a representation of the qualification code BCC30407 taken from the Civil Construction Industry Training Package (BCC03) which should be consulted for full description of requirements. BCC30407 is endorsed until 31/12/2006.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the METS CSSN, on 15/4/2008.
Entry Requirements
No information
Traineeships and Apprenticeships
No information