Qualification Outline

Date retreived
22/07/2026 6:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Electrotechnology Data Communications

Certificate II in Electrotechnology Data Communications

Qualification
National Code:
UTE20299
State Code:
M020
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
21/07/1999
Approved Date
—
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
400
Duration
Unspecified
Current Release Number
1.00
Current Release Date
21/07/1999
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 21/07/1999 Current Archived
Description
Schedule
1.

**CORE** The hours allocated against each competency in this program are related to assessment and reporting. The underpinning knowledge and skills (listed in subsequent Groups 3 - 5) are to be completed prior to assessment and reporting on the core units below.

State Code National Code Title Hours Type
M2065 UTENES202FB Assemble/disassemble electrical/electronic components (Data communications) 5 Unit of competency
M0545 UTENES105GA Install & terminate wiring systems (Cabling/wiring support & protection) 4 Unit of competency
M0546 UTENES105HA Install & terminate wiring systems (Network communications) 5 Unit of competency
M2064 UTENES201FB Perform basic repair to electrical/electronic apparatus (Data communications) 5 Unit of competency
M0681 UTENES401FA Perform Functional Apparatus Checks (Data Communications) 5 Unit of competency
2.

ELECTIVE UNITS - Learner to select and complete ONE unit from list below. These units do not have any off the job components and will be assessed as on-the-job.

State Code National Code Title Hours Type
M0501 UTENES002A Attend to breakdown 20 Unit of competency
M0504 UTENES005A Coordinate materials 20 Unit of competency
M0502 UTENES003A Transport apparatus & materials 20 Unit of competency
3.

Learners to have completed all the underpinning knowledge listed below to meet part of the assessment requirements of the competency units NES105G, NES105H, NES201F, NES202F and NES401F.

State Code National Code Title Hours Type
87549 NE172 Electrical Wiring and Equipment 1 18 Module
87530 NBB02 Occupational Health and Safety 18 Module
87529 NE175 Workshop Practices 36 Module
4.

Learners to have completed all the underpinning knowledge listed below (if not completed in previous groups), to meet part of the assessment requirements of the competency units NES105H, NES201F, NES202F and NES401F.

State Code National Code Title Hours Type
90070 NUE52 Applied Electricity 1 36 Module
90079 NUE003 Buildings and Building Systems 36 Module
90191 NUE210 Drawing Interpretation and Sketching 18 Module
90113 NUE058 Electrical Concepts and Applications 36 Module
90336 NUE190 Standards and Regulations - Telecommunications 18 Module
90337 NUE191 Telecommunications Cables and Installation Methods 72 Module
90340 NUE193 Telecommunications Earthing and Protection 18 Module
90338 NUE192 Telecommunications Systems Overview 18 Module
5.

Learners to have completed all the underpinning knowledge listed below (if not completed in previous groups), to meet part of the assessment requirements of the competency units NES201F, NES202F and NES401F.

State Code National Code Title Hours Type
90116 NUE095 Parts and Component Selection 18 Module
No information
VET Info Notes
This training program is a representation of the qualification code UTE20299 taken from the Electrotechnology Training Package UTE99 which should be consulted for full description of requirements. UTE99 is accredited until the next review date.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836 or EE-OZ Training Standards Australia, ph (02) 9290 2533.

3. This qualification was entered on to the CMS by the Engineering & Mining Curriculum Support Services Network (EMCSSN) on 06/11/02.
Entry Requirements
No information
Traineeships and Apprenticeships
No information