Qualification Outline
Date retreived
22/07/2026 10:18 PM AWST
22/07/2026 10:18 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Process Manufacturing (Plastics-Extrusion)
Certificate II in Process Manufacturing (Plastics-Extrusion)
Qualification
National Code:
PMB20598
PMB20598
State Code:
C140
C140
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0303 - Process And Resources Engineering
Original TGA Release Date
22/10/1998
Approved Date
21/05/2001
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
286
Duration
Unspecified
Current Release Number
1.00
Current Release Date
22/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 22/10/1998 | Current | Archived |
Description
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C0762 | PMBOHS04A | Apply emergency/incident procedures | 26 | Unit of competency |
| C0729 | PMBCOMM01A | Complete workplace documents | 26 | Unit of competency |
| C0759 | PMBOHS01A | Follow occupational health and safety procedures | 26 | Unit of competency |
| C0798 | PMBPROD30A | Monitor process operations | 26 | Unit of competency |
| C0731 | PMBCOMM03A | Participate in interactive workplace communication | 26 | Unit of competency |
| C0748 | PMBHANDLE03A | Shift materials safely by hand | 26 | Unit of competency |
| C0803 | PMBPROD35A | Use materials and process knowledge to complete work operations | 26 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C583 | PMB20101 | Certificate II in Plastics | Qualification |
VET Info Notes
GENERAL NOTES
This training program is a representation of the qualification PMB20598 taken
from the Plastics, Rubber and Cablemaking PMB98
which should be consulted for full descriptions of requirements. PMB98 is
accredited until 01/10/2000.
1. This qualification is the copyright of The Australian National Training
Authority. RTO's who wish
to deliver this qualification must be registered by their State
accrediting body.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by Central TAFE on
21/05/01.
This training program is a representation of the qualification PMB20598 taken
from the Plastics, Rubber and Cablemaking PMB98
which should be consulted for full descriptions of requirements. PMB98 is
accredited until 01/10/2000.
1. This qualification is the copyright of The Australian National Training
Authority. RTO's who wish
to deliver this qualification must be registered by their State
accrediting body.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by Central TAFE on
21/05/01.
Entry Requirements
No information
Traineeships and Apprenticeships