Qualification Outline

Date retreived
22/07/2026 5:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Competitive Manufacturing

Certificate III in Competitive Manufacturing

Qualification
National Code:
MCM30104
State Code:
W252
TGA Status:
Deleted
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
03/04/2006
Approved Date
14/09/2006
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
390
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
03/04/2006
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 03/04/2006 Current Approved
Description
Schedule
1.

In total 8 (EIGHT) units must be completed as specified below. At least 3 (THREE) units must be from the 400 series.

CORE - Complete the following unit.

State Code National Code Title Hours Type
W2562 MCMS200A Apply competitive manufacturing practices 40 Unit of competency
2.

ELECTIVE - complete 1 (ONE) of the following units.

State Code National Code Title Hours Type
W2565 MCMS401A Ensure process improvements are sustained 50 Unit of competency
W2563 MCMS201A Sustain process improvements 40 Unit of competency
3.

ELECTIVE - complete at least 1 (ONE) of the following units. Note that even though 2 (TWO) units may be completed only 1 (ONE) unit can be counted towards the Certificate III.

State Code National Code Title Hours Type
W2558 MCMC410A Lead change in a manufacturing environment 50 Unit of competency
W2557 MCMC210A Manage the impact of change on own work 40 Unit of competency
4.

ELECTIVE - complete at least 1 (ONE) of the following series 400 MCM Tools units.

State Code National Code Title Hours Type
W2585 MCMT432A Analyse manual handling processes 50 Unit of competency
W2589 MCMT452A Apply statistics to processes in manufacturing 50 Unit of competency
W2593 MCMT482A Assist in implementing a proactive maintenance strategy 50 Unit of competency
W2583 MCMT421A Facilitate a Just in Time (JIT) system 50 Unit of competency
W2591 MCMT461A Facilitate SCADA systems in a manufacturing team or work area 50 Unit of competency
W2590 MCMT460A Facilitate the use of planning software systems in manufacturing 50 Unit of competency
W2584 MCMT430A Improve cost factors in work practices 50 Unit of competency
W2586 MCMT440A Lead 5S in a manufacturing environment 50 Unit of competency
W2588 MCMT451A Mistake proof a production process 50 Unit of competency
W2592 MCMT481A Undertake proactive maintenance analyses 50 Unit of competency
W2587 MCMT450A Undertake process capability improvements 50 Unit of competency
C6052 PMASUP390A Use structured problem solving tools 20 Unit of competency
5.

ELECTIVE - complete sufficient additional units to achieve 8 (EIGHT) units in total. Units may be selected from Group 4 or Group 5 or from another relevant endorsed Training Package. No more than 4 (FOUR) units may be chosen from another Training Package - these units must be at the AQF 2, 3 or 4 level and must be relevant to the workplace.
In total at least 3 (THREE) units must be from the 400 CMI series.

State Code National Code Title Hours Type
W2574 MCMT240A Apply 5S procedures in a manufacturing environment 30 Unit of competency
W2572 MCMT230A Apply cost factors to work practices 35 Unit of competency
W2571 MCMT221A Apply Just in Time (JIT) procedures 30 Unit of competency
W2576 MCMT251A Apply quality standards 30 Unit of competency
W2570 MCMT220A Apply quick changeover procedures 30 Unit of competency
W2582 MCMT281A Contribute to the application of a proactive maintenance strategy 30 Unit of competency
W2573 MCMT231A Interpret product costs in terms of customer requirements 30 Unit of competency
W2575 MCMT250A Monitor process capability 30 Unit of competency
W2581 MCMT280A Undertake root cause analysis 30 Unit of competency
W2577 MCMT260A Use planning software systems in manufacturing 30 Unit of competency
W2578 MCMT261A Use SCADA systems in manufacturing 30 Unit of competency
W2579 MCMT270A Use sustainable energy practices 30 Unit of competency
W2580 MCMT271A Use sustainable environmental practices 30 Unit of competency
Replaced By
State Code National Code Title Type
W523 MSA31108 Certificate III in Competitive Manufacturing Qualification
VET Info Notes
This training program is a representation of the qualification code MCM30104 taken from the Competitive Manufacturing Training Package MCM04 which should be consulted for a full description of requirements. MCM04 is endorsed until 30/9/07.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the METS CSSN on 6 September 2006.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR06260) MANUFACTURING EQUIPMENT OPERATION (LEVEL 3) Traineeship