Qualification Outline
Date retreived
22/07/2026 7:40 AM AWST
22/07/2026 7:40 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Printing and Graphic Arts (Print Finishing)
Certificate III in Printing and Graphic Arts (Print Finishing)
Qualification
National Code:
ICP31499
ICP31499
State Code:
C255
C255
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
18/01/1999
Approved Date
14/11/2000
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
910
Duration
Unspecified
Current Release Number
1.00
Current Release Date
18/01/1999
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 18/01/1999 | Current | Archived |
Description
Schedule
1. CORE
The requirements for Certificate III level are:18 units of competence including at least 5 at "c" level or above OR 16 units of competence including at least 1 at "c" level and 2 at "d" level PLUS ONE appropriate holistic knowledge component
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3404 | ICPSU62AA | Communicate in the workplace | 30 | Unit of competency |
| C3263 | ICPKN13A | Demonstrate knowledge and requirements of converting and finishing | 1 | Unit of competency |
| C3402 | ICPSU61AA | Follow OH&S practices and identify environmental hazards | 30 | Unit of competency |
| C3383 | ICPSU16AA | Inspect quality against required standards | 30 | Unit of competency |
2.
3.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3218 | ICPCF21CA | Set up and produce complex cut (guillotined) product | 50 | Unit of competency |
| C3234 | ICPCF41DA | Set up machine for complex folding (sequenced / multiple) | 50 | Unit of competency |
4. ELECTIVES
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3250 | ICPCF71CA | Decorate paper | 50 | Unit of competency |
| C3223 | ICPCF26BA | Produce basic flat bed die cut or embossed product | 20 | Unit of competency |
| C3345 | ICPPR62BA | Produce foil stamped product | 30 | Unit of competency |
| C3248 | ICPCF67DA | Restore books | 70 | Unit of competency |
| C3247 | ICPCF65DA | Set up and produce hand bound book | 70 | Unit of competency |
| C3246 | ICPCF63BA | Set up and produce hand fastened product | 40 | Unit of competency |
| C3249 | ICPCF69CA | Set up for and produce hand made box | 50 | Unit of competency |
| C3344 | ICPPR61BA | Set up for foil stamping | 30 | Unit of competency |
| C3221 | ICPCF25BA | Set up machine for basic flat bed die cutting or embossing | 20 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3301 | Binding and Finishing | Accredited course | |
| 4399 | 10866NSW | Certificate III in Book Restoration | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C839 | ICP30705 | Certificate III in Printing and Graphic Arts (Print Finishing) | Qualification |
VET Info Notes
GENERAL NOTES
1. This qualification is a representation of the qualification ICP31499
taken from the Printing and
Graphic Arts Training Package which should be consulted for full
descriptions of its requirements.
ICP 31499 endorsed till the 28/02/2002.
2. This qualification is the copyright of The Australian National
Training Authority. RTOs who
wish to deliver this qualification must be registered by their
State accrediting body.
3. Further information on this qualification is contained in the
Training Package available from
Australian Training Products Ltd., Tel: (03) 9639 9836.
4. This course was entered on to the CMS by Central TAFE on 07/12/2000.
1. This qualification is a representation of the qualification ICP31499
taken from the Printing and
Graphic Arts Training Package which should be consulted for full
descriptions of its requirements.
ICP 31499 endorsed till the 28/02/2002.
2. This qualification is the copyright of The Australian National
Training Authority. RTOs who
wish to deliver this qualification must be registered by their
State accrediting body.
3. Further information on this qualification is contained in the
Training Package available from
Australian Training Products Ltd., Tel: (03) 9639 9836.
4. This course was entered on to the CMS by Central TAFE on 07/12/2000.
Entry Requirements
No information
Traineeships and Apprenticeships