Qualification Outline
22/07/2026 6:38 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Split Air-conditioning and Heat Pump Systems
Certificate II in Split Air-conditioning and Heat Pump Systems
UEE20111
D632
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 17/04/2014 | Current | Approved |
Description
Scope
The installation, commissioning and de-commissioning of single head, split air conditioning and heat pumps systems to a prescribed routine where the maximum plant capacity for each system does not exceed 18 kWr.
This includes wall hung, floor and ceiling suspended, cassette and ducted fan coil split systems and water heating heat pump systems. This qualification excludes competencies required for service, repair, maintenance, diagnostic/fault finding and electrical work or the safe and proper installation of commercial refrigeration, air conditioning and heat pump plant and equipment.
Note: 1. The letter “r” denotes “refrigeration” or cooling capacity, not electrical input power.
2. The Ozone Protection and Synthetic Greenhouse Gas Legislation Amendment Bill 2003 and the Ozone Protection and Synthetic Gas Management Regulations apply to this qualification. Prior to planning the delivery of any training and/or assessment activities all legislative and regulatory requirements shall be identified and included.
^ From 1 July 2022 the elective unit HLTAID001 must no longer be delivered and will be replaced in the Packaging Rules by the unit HLTAID009 - for more information see: https://asqa.gov.au/news-events/news/reminder-about-superseded-hlt-first-aid-units
Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:- All the Core competency standard units, and
- A combination of Elective competency standard units selected from Group A and/or Group B to achieve a total weighting of 20 points, and
- All the required pre-requisite competency standard units.
Group A Elective Units
- Units may be chosen to a total weighting of 10 points
- Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. If units have not being assigned a weighting in the Electrotechnology Training Package, their weighting will be 10 points.
Group B Elective Units
- Units may be chosen to a total weighting of 20 points
1. Core Units
All ten (10) units must be completed
2. Group A Elective Units
Units may be chosen from this group to a total weighting of 10 points.
Please refer to the Training Package for the full details of weighting points per unit
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7740 | UEENEEC010B | Deliver a service to customers | 18 | Unit of competency |
| W7731 | UEENEEC001B | Maintain documentation | 18 | Unit of competency |
| WD086 | HLTCPR211A | Perform CPR | 3 | Unit of competency |
| W7822 | UEENEEE020B | Provide basic instruction in the use of electrotechnology apparatus | 18 | Unit of competency |
| W7738 | UEENEEC008B | Receive and store materials and equipment for electrotechnology work | 18 | Unit of competency |
| W7732 | UEENEEC002B | Source and purchase material/parts for installation or service jobs | 18 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
3. Group B Elective Units
All units may be chosen from this group to a total weighting of 20 points.
Please refer to the Training Package for the full details of weighting points per unit
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S7340 | UEENEEJ104A | Establish the basic operating conditions of air conditioning systems | 18 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W405 | UEE20107 | Certificate II in Air-conditioning Split Systems | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFP0 | UEE20120 | Certificate II in Split Air Conditioning and Heat Pump Systems | Qualification |
VET Info Notes
1. This qualification is the copyright of Department of Education, Employment and Workplace Relations.
2. Further information on this qualification is contained in the Training Package available from the national register website at Training.gov.au
3. This qualification was entered on to STARS on 19/12/2011.
Entry Requirements
Not Applicable
Traineeships and Apprenticeships
