Qualification Outline
Date retreived
22/07/2026 7:38 AM AWST
22/07/2026 7:38 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Process Manufacturing (Plastics-Blown Film)
Certificate III in Process Manufacturing (Plastics-Blown Film)
Qualification
National Code:
PMB30798
PMB30798
State Code:
C173
C173
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0303 - Process And Resources Engineering
Original TGA Release Date
22/10/1998
Approved Date
19/07/2001
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
247
Duration
Unspecified
Current Release Number
1.00
Current Release Date
22/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 22/10/1998 | Current | Archived |
Description
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C0784 | PMBPROD16A | Run blown film line | 52 | Unit of competency |
2. ELECTIVES
Learners to select 6 units, at least 4 from the list in the Training Package, up to 2 of these 6 elective units may be from other Training Packages from AQF III.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C0852 | PMBWKOPS04A | Interpret job specifications | 26 | Unit of competency |
| C0802 | PMBPROD34A | Monitor product quality standards | 52 | Unit of competency |
| C0835 | PMBPREP03A | Set up equipment for continuous operations | 26 | Unit of competency |
| C0811 | PMBPROD43A | Shut down work area | 13 | Unit of competency |
| C0810 | PMBPROD42A | Troubleshoot production faults and defects | 52 | Unit of competency |
| C0839 | PMBQUAL02A | Use quality improvement systems and processes | 26 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C587 | PMB30101 | Certificate III in Plastics | Qualification |
VET Info Notes
GENERAL NOTES
This training program is a representation of the qualification PMB30798 taken
from the Plastics, Rubber and
Cablemaking Training Package PMB98 which should be consulted for full
descriptions of requirements.
PMB98 is endorsed until 01/10/2000.
1. This qualification is the copyright of The Australian National Training
Authority.
2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by Central TAFE on
17/07/01.
This training program is a representation of the qualification PMB30798 taken
from the Plastics, Rubber and
Cablemaking Training Package PMB98 which should be consulted for full
descriptions of requirements.
PMB98 is endorsed until 01/10/2000.
1. This qualification is the copyright of The Australian National Training
Authority.
2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by Central TAFE on
17/07/01.
Entry Requirements
No information
Traineeships and Apprenticeships