Qualification Outline
21/07/2026 11:11 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in Aeroskills (Aircraft Maintenance Engineering - Avionics)
Certificate IV in Aeroskills (Aircraft Maintenance Engineering - Avionics)
MEA40197
M059
Deleted
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 30/07/2004 | Current | Approved |
Description
Schedule
1. CORE
GENERIC CORE: Learners to complete all core units within this group.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1343 | MEAC05B | Apply quality standards applicable to maintenance processes | 2 | Unit of competency |
| M1345 | MEAC08B | Complete industry documentation | 2 | Unit of competency |
| M1347 | MEAC07B | Interpret and use industry manuals and specifications | 2 | Unit of competency |
| M1341 | MEAC01B | Interpret occupational health and safety practices in maintenance | 2 | Unit of competency |
| M1346 | MEAC09B | Perform basic hand skills, standard trade practices and fundamentals | 4 | Unit of competency |
| M1342 | MEAC03B | Plan and organise work activities | 2 | Unit of competency |
2.
STREAM SPECIFIC CORE: Learners to complete all core in this group. Note: M0928 MEAS02A has been replaced by M0929 MEAS03A
3.
COMMON CORE MODULES: UNDERPINING CORE COMPETENCIES
Combinations of these modules can be usedto achieve the Units of Competencies listed in Group 1. Note each module needs to be done once only, though it may be relevant to several Competencies. See Notes or matrix at the end of this document.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 24205 | NAC05 | Fluid Power and Oxygen | 20 | Module |
| 24200 | NAC01 | Introduction to Aviation | 20 | Module |
| 24206 | NAC06 | Introduction to Electrical Principles | 40 | Module |
| 24201 | NAC02 | Occupational Health & Safety in Aviation | 20 | Module |
| 24202 | NAC03 | Technical Doc, Drawing & Quality Standards | 20 | Module |
| 24203 | NAC04 | Trade Skills 1 | 80 | Module |
4. CORE
COMPULSORY UNITS: Complete these(Stream Specific) units
5. ELECTIVE
MEAA13A - ** FIXED WING ** Learner to select either this option OR ROTARY WING option. If selecting this stream, complete all electives listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 24267 | NAA22 | Auto Flight Control Systems | 40 | Module |
| 24266 | NAA21 | Flight Control & Flight Director Systems | 40 | Module |
6. ELECTIVE
MEAA13A - ** ROTARY WING ** Learner to select either this option or FIXED WING option. If selecting this stream, complete all electives listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 24270 | NAA24 | Helicopter Auto Flight Control Systems | 40 | Module |
| 24269 | NAA23 | Helicopter Flight Control & Flight Director Systems | 40 | Module |
7.
OPTIONAL ELECTIVES
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 24267 | NAA22 | Auto Flight Control Systems | 40 | Module |
| 24266 | NAA21 | Flight Control & Flight Director Systems | 40 | Module |
| 24270 | NAA24 | Helicopter Auto Flight Control Systems | 40 | Module |
| 24269 | NAA23 | Helicopter Flight Control & Flight Director Systems | 40 | Module |
8.
Old A versions of Competencies now replaced by B versions in Group 1
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0887 | MEAC08A | Complete industry documentation | 2 | Unit of competency |
| M0886 | MEAC07A | Interpret and use industry manuals and specifications | 2 | Unit of competency |
| M0880 | MEAC01A | Interpret occupational health and safety practices in maintenance | 2 | Unit of competency |
| M0884 | MEAC05A | Interpret quality standards applicable to maintenance processes | 2 | Unit of competency |
| M0888 | MEAC09A | Perform basic hand skills and standard trade practices | 4 | Unit of competency |
| M0882 | MEAC03A | Plan and organise work activities | 2 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3604 | Engineering (Ame- Avionics) | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W044 | MEA40602 | Certificate IV in Aeroskills (Avionics) | Qualification |
VET Info Notes
CORE Unit Suggested modules
MEAA01A NAA01, NAA03
MEAA02A NAA04
MEAA03A NAA01, NAA02, NAA04, NAS12
MEAA10A NAA05, NAA06, NAA08, NAA16
MEAA11A NAA14, NAA27
MEAA12A NAA18, NAA19
MEAA14A NAA11, NAA12, NAA15, NAA25
MEAA26A NAA01, NAA04
This training programe is a representation of the qualification MEA40197 taken
from the Aeroskills Training Package MEA97 which should be consulted for full
description of requirements. MEA97 is accredited until 28/12/2001. Note:
This is the review date.
1. The qualification is the copyright of the Australian National Training Authority
2. Further information on this qualification is contained in the Training
Package available from Australian Training Products Ltd., Telephone: (03) 9630
9836.
3. This qualification was entered on to the CMS by Engineering & Mining Curriculum Services Support Network (EMCSSN).
4. The modules attached to this qualification are a pathway to competence and
module the underpinning knowledge and skills proceeding formal assessment of
competence.
5. This qualification was ammended on 03/09/03 by METS CSSN. Note training must note exceed the nominal hours for this qualification
Entry Requirements
No information
Traineeships and Apprenticeships
Part-time is defined as a minimum of 20 hours per week.