Qualification Outline
Date retreived
22/07/2026 12:45 AM AWST
22/07/2026 12:45 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Drainage
Certificate II in Drainage
Qualification
National Code:
BCP20103
BCP20103
State Code:
W067
W067
TGA Status:
Deleted
Deleted
DTWD Status:
Replaced
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
02/02/2009
Approved Date
12/02/2004
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
344
Duration
1 Semester
Current Release Number
1.00
Current Release Date
02/02/2009
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 02/02/2009 | Current | Approved |
Description
Schedule
1.
CORE - must complete all units
2.
ELECTIVES - Must complete four (4) of the following electives
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W1318 | BCPRF2003A | Collect and store roof water | 24 | Unit of competency |
| W1257 | BCPCM2008A | Cut and join sheet metal | 16 | Unit of competency |
| W1258 | BCPCM2009A | Cut with oxy-LPG/acetylene | 8 | Unit of competency |
| W1330 | BCPSN3005A | Install pre-treatment facilities | 10 | Unit of competency |
| W1357 | BCCPL3001B | Install water mains pipelines | 36 | Unit of competency |
| W1268 | BCPDR2003A | Maintain effluent disinfection systems | 12 | Unit of competency |
| W1272 | BCPDR3001A | Plan the layout for a residential sanitary drainage system | 32 | Unit of competency |
| W1264 | BCPCM3002A | Weld polyethylene (PE) pipe using fusion method | 8 | Unit of competency |
| W1262 | BCPCM2013A | Weld using arc welding equipment | 8 | Unit of competency |
| W1261 | BCPCM2012A | Weld using oxy-acetylene equipment | 8 | Unit of competency |
3.
Requested WA electives in addition to National Training Package Electives
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0360 | BCF2009A | Carry out load slinging of off-site materials | 4 | Unit of competency |
| W1265 | BCPCM3003A | Fabricate and install non-ferrous pressure piping | 8 | Unit of competency |
| N0220 | BCC1013A | Monitor machine operations | 8 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W574 | CPC20708 | Certificate II in Drainage | Qualification |
VET Info Notes
This training program is a representation of the qualification code BCP20103 taken from the Plumbing and Services Training Package BCP03 which should be consulted for full description of requirements. BCP20103 is endorsed until 30 November 2006.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN Swan TAFE on 21 January 2004 following the proposal to deliver it as a pilot traineeship program.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN Swan TAFE on 21 January 2004 following the proposal to deliver it as a pilot traineeship program.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR04990) DRAINAGE (LEVEL 2)
Traineeship