Qualification Outline

Date retreived
22/07/2026 8:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Sampling and Measurement

Certificate II in Sampling and Measurement

Qualification
National Code:
PML20104
State Code:
C727
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0199 - Other Natural And Physical Sciences
Original TGA Release Date
20/10/2004
Approved Date
19/07/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
360
Duration
1 Semester
Current Release Number
1.00
Current Release Date
20/10/2004
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 20/10/2004 Current Approved
Description
Schedule
1.

To be awarded a Certificate II in Sampling and Measurement PML20104, competency must be achieved in a total of Seven (7) units consisting of: all three (3) core units and four (4) elective units.

CORE UNITS: Learners to complete all three (3) core units listed below.

State Code National Code Title Hours Type
C7641 PMLOHS302A Participate in laboratory/field workplace safety 40 Unit of competency
C7634 PMLDATA200A Record and present data 60 Unit of competency
C7635 PMLORG200A Work within a laboratory/field workplace (induction) 40 Unit of competency
2.

ELECTIVE UNITS: The Elective units must include: a minimum of one (1) unit from the PML200 series, a maximum of two (2) units from the PML300 series and a maximum of two (2) relevant units from other endorsed Training Packages.

**Learners to complete a minimum of one (1) unit from the PML200 series units listed below, including at least one (1) of the following (PMLSAMP200A and PMLTEST200A - shown in italics in the Training Package outline on pages 51 & 52).

State Code National Code Title Hours Type
C5836 PMLSAMP200A Collect routine site samples 40 Unit of competency
C7637 PMLTEST200A Conduct routine site measurements 40 Unit of competency
C7636 PMLSAMP201A Handle and transport samples or equipment 40 Unit of competency
3.

ELECTIVES: Learners to complete a maximum of two (2) units from the PML300 series listed below:

State Code National Code Title Hours Type
C7644 PMLQUAL301B Apply critical control point requirements 40 Unit of competency
C7652 PMLTEST306B Assist with fieldwork 40 Unit of competency
C7638 PMLCOM300B Communicate with other people 20 Unit of competency
C7643 PMLQUAL300B Contribute to the achievement of quality objectives 60 Unit of competency
C7639 PMLMAIN300B Maintain the laboratory fit for purpose 20 Unit of competency
C7646 PMLSCIG300B Operate basic handblowing equipment 60 Unit of competency
C7651 PMLTEST305B Perform aseptic techniques 40 Unit of competency
C7648 PMLTEST300B Perform basic tests 80 Unit of competency
C7655 PMLTEST310A Perform histological procedures 40 Unit of competency
C7654 PMLTEST308A Perform microscopic examination 40 Unit of competency
C7642 PMLORG301A Plan and conduct laboratory/field work 40 Unit of competency
C7650 PMLTEST304B Prepare culture media 20 Unit of competency
C7653 PMLTEST307B Prepare trial batches for evaluation 40 Unit of competency
C7649 PMLTEST303B Prepare working solutions 80 Unit of competency
C7645 PMLSAMP302A Receive and prepare samples for testing 40 Unit of competency
C7647 PMLSCIG301B Repair glass apparatus using simple glassblowing equipment 60 Unit of competency
C7640 PMLOHS301B Work safely with instruments that emit ionising radiation 60 Unit of competency
Replaced By
State Code National Code Title Type
W734 MSL20109 Certificate II in Sampling and Measurement Qualification
VET Info Notes
This training program is a representation of the qualification code PML20104 taken from the Laboratory Operations Training Package PML04 which should be consulted for full description of requirements. PML04 is endorsed until 30/09/2007.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to STARS by Central TAFE on 18/07/2005.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR06070) SAMPLING AND MEASUREMENT (LEVEL 2) Traineeship