Qualification Outline
22/07/2026 11:21 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Electrotechnology Servicing
Certificate II in Electrotechnology Servicing
UTE20502
W077
Deleted
Archived
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 21/07/1999 | Current | Archived |
Description
Schedule
Pathways
| State Code | Title |
|---|---|
| WS54 | Airconditioning and Refrigeration |
| WS55 | Security Systems |
| WS56 | Refrigeration/Small Appliances |
| WS57 | Personal Computer Maintenance and Upgrade |
1.
CORE: The hours allocated against each competency in this program are related to assessment and reporting. Note: the nominal course hours (400) are the maximum hours and specialisations require less than the maximum hours. The maximum hours are not to be exceeded.
Select one (1) competency from UTENES201, 202 and 401 related to the specialisation. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
2.
ELECTIVE UNITS: Select one (1) elective unit from Group 02
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0501 | UTENES002A | Attend to breakdown | 20 | Unit of competency |
| M0504 | UTENES005A | Coordinate materials | 20 | Unit of competency |
| M0502 | UTENES003A | Transport apparatus & materials | 20 | Unit of competency |
3.
SPECIALISATION ANTENNAE: Select one (1) specialisation competency from Group 03. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) futher unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| M0547 | UTENES105IA | Install & terminate wiring systems (Power & control - extra low voltage) | 5 | Unit of competency |
| W1378 | UTENES120A | Install consumer video systems | 40 | Unit of competency |
| 90120 | NUE99 | Introduction to Antenna Systems | 36 | Module |
| 90121 | NUE100 | Introduction to Antennas | 36 | Module |
| 90082 | NUE009 | Tv Signal Source Systems Install | 36 | Module |
4.
SPECIALISATION APPLIANCES-ELECTRICAL: Select one (1) specialisation competency from Group 04. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0611 | UTENES209RA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Electrical Heaters) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90093 | NUE018 | Dom Clths, Dsh Wshrs and Clths Dryers | 36 | Module |
| 90090 | NUE016 | Domestic Appliance Principles | 36 | Module |
| 90106 | NUE032 | Domestic Electrical Heating Appliances | 36 | Module |
5.
SPECIALISATION APPLIANCES-REFRIGERATION: Select one (1) specialisation competency from Group 05. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0614 | UTENES209NA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Pre-Assembled Neon Signs) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90090 | NUE016 | Domestic Appliance Principles | 36 | Module |
| 86714 | NR001 | Refrigeration Fundamentals | 36 | Module |
| 90087 | NUE013 | Service Refrigerators, Freezers and Room A/C | 36 | Module |
6.
SPECIALISTATION AUTOMOTIVE ACCESSORIES: Select one (1) specialisation competency from Group 06. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90118 | NUE097 | Automotive Alarm Systems | 36 | Module |
| 88038 | VBB045 | Automotive Sound Systems | 36 | Module |
| 88039 | VBB046 | Cellular Phone and Cb Radio Install | 36 | Module |
| M0547 | UTENES105IA | Install & terminate wiring systems (Power & control - extra low voltage) | 5 | Unit of competency |
7.
SPECIALISATION BUSINESS EQUIPMENT: Select one (1) specialisation competency from Group 07. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90133 | NUE112 | Electromechanics of Business Machines | 36 | Module |
| M0547 | UTENES105IA | Install & terminate wiring systems (Power & control - extra low voltage) | 5 | Unit of competency |
| 90131 | NUE110 | Introduction to Application Software | 36 | Module |
| 90132 | NUE111 | Op Concepts of Business Machines | 36 | Module |
8.
SPECIALISATION COIL WINDING: Select one (1) specialisation competency from Group 08. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0611 | UTENES209RA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Electrical Heaters) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90362 | NUE655 | Coil winding testing and soldering (2004) | 72 | Module |
| 43029 | EPC196 | Machine Assembly - Electrical (Eptmo7) | 36 | Module |
9.
SPECIALISATION COMPONENT EQUIPMENT ASSEMBLY: Select one (1) specialisation competency from Group 09. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
10.
SPECIALISATION COMPUTER ASSEMBLY: Select one (1) specialisation competency from Group 10. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 87181 | NE112 | Computer Peripherals | 36 | Module |
| 90131 | NUE110 | Introduction to Application Software | 36 | Module |
| 87616 | NE104 | Pc Testing and Modification-basic | 18 | Module |
| 31282 | ITH202 | Using A Graphical User Interface | 20 | Module |
11.
SPECIALISATION RENEWABLE ENERGY: Select one (1) specialisation competency from Group 11. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting. Note: This specialisation exceeds the maximum 400 funded hours. The underpinning skills and knowledge (modules) in group 11 will need to be selected up to the maximum funding hours.
OPTIONAL UNITS: A further selection can be made by choosing one (1) futher unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
12.
SPECIALISATION SECURITY SYSTEMS: Select one (1) specialisation competency from Group 12. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) futher unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90091 | NUE017 | Building Structures | 18 | Module |
| M0547 | UTENES105IA | Install & terminate wiring systems (Power & control - extra low voltage) | 5 | Unit of competency |
| 90222 | NUE480 | Security Systems 1 | 36 | Module |
| 90226 | NUE483 | Security Systems 2 | 36 | Module |
| 73072 | NUE199 | Telecommunications CPR Regulations and Installations - Restricted | 20 | Module |
13.
SPECIALISATION FIRE ALARMS: Select one (1) specialisation competency from Group 13. The underpinning skills and knowledge are contained in the non endorsed component (modules) and these are required to be completed prior to assessment and reporting.
OPTIONAL UNITS: A further selection can be made by choosing one (1) further unit per specialisation if required. Reference must be made to the Training Package to obtain the details off the competency and qualification requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
| 90360 | NUE494 | Building systems and materials | 36 | Module |
| 90359 | NUE493 | Fire alarms routine testing | 36 | Module |
| M0547 | UTENES105IA | Install & terminate wiring systems (Power & control - extra low voltage) | 5 | Unit of competency |
| 90230 | NUE490 | Intro to Fire Alarm Installations | 36 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M023 | UTE20599 | Certificate II in Electrotechnology Servicing | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W096 | UTE20504 | Certificate II in Electrotechnology Servicing | Qualification |
VET Info Notes
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 15/12/2004
Entry Requirements
No information
Traineeships and Apprenticeships