Qualification Outline

Date retreived
22/07/2026 4:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Seafood Industry (Fishing Operations - Marine Engine Driver II)

Certificate III in Seafood Industry (Fishing Operations - Marine Engine Driver II)

Qualification
National Code:
SFI32204
State Code:
S424
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0317 - Maritime Engineering And Technology
Original TGA Release Date
24/02/2004
Approved Date
04/02/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
448
Duration
1 Semester
Current Release Number
1.00
Current Release Date
24/02/2004
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 24/02/2004 Current Approved
Description
Schedule
1.

A total of 12 units must be completed, consisting of: 4 Core units, 8 Fishing Specialist units (GroupB), and all units from the Marine Engine Driver II Group (Group R).

State Code National Code Title Hours Type
S4140 SFICORE101B Apply basic food handling and safety practices 20 Unit of competency
S4141 SFICORE103B Communicate in the seafood industry 30 Unit of competency
S4143 SFICORE106A Meet workplace OHS requirements 20 Unit of competency
S4142 SFICORE105A Work effectively in the seafood industry 30 Unit of competency
2.

FISHING SPECIALIST UNITS A total of 12 units must be completed, consisting of: 8 Fishing Specialist units from this group.

State Code National Code Title Hours Type
S4236 SFIFISH305B Adjust and position beach seines, mesh nets or gill nets 20 Unit of competency
S4234 SFIFISH303B Adjust and position drop lines and long lines 20 Unit of competency
S4235 SFIFISH304B Adjust and position hand operated lines 10 Unit of competency
S4233 SFIFISH302B Adjust and position pots and traps 20 Unit of competency
S4237 SFIFISH306B Adjust and position purse seines 40 Unit of competency
S4232 SFIFISH301B Adjust and position trawls 40 Unit of competency
C5006 HLTFA1A Apply basic First Aid 20 Unit of competency
S4229 SFIFISH210B Assemble and repair damaged netting 25 Unit of competency
S4255 SFIOHS301B Implement OHS policies and guidelines 40 Unit of competency
S4240 SFIFISH401B Locate fishing grounds and stocks of fish 60 Unit of competency
S4228 SFIFISH209B Maintain the temperature of seafood 10 Unit of competency
S4226 SFIFISH207B Maintain, prepare, deploy and retrieve beach seines, mesh nets or gill nets to land catch 20 Unit of competency
S4224 SFIFISH205B Maintain, prepare, deploy and retrieve drop lines and long lines to land catch 20 Unit of competency
S4225 SFIFISH206B Maintain, prepare, deploy and retrieve hand operated lines to land catch 20 Unit of competency
S4223 SFIFISH204B Maintain, prepare, deploy and retrieve pots and traps to land catch 40 Unit of competency
S4227 SFIFISH208B Maintain, prepare, deploy and retrieve purse seines to land catch 40 Unit of competency
S4222 SFIFISH203B Maintain, prepare, deploy and retrieve trawls to land catch 40 Unit of competency
S4241 SFIFISH402B Manage and control fishing operations 20 Unit of competency
M0246 MEM5.1AA Manual soldering/desoldering - electrical/electronic components 36 Unit of competency
S4298 SFISHIP207B Operate and maintain outboard motors 20 Unit of competency
M1755 MEM5.12AB Perform routine manual metal arc welding 18 Unit of competency
S4302 SFISHIP212B Take emergency action on board a vessel 20 Unit of competency
M1756 MEM5.15AB Weld using manual metal arc welding process 36 Unit of competency
3.

A total of 12 units must be completed, consisting of: 4 Core units, 8 Fishing Specialist units (Group B), and all units from the Marine Engine Driver II Group (Group R). The Marine Driver III group of units is a prereuisite requirement for the Marine Engine Driver II Certificate of Competency.

State Code National Code Title Hours Type
S2131 TDMMF4001A Carry out basic operational engineering calculations 8 Unit of competency
S4143 SFICORE106A Meet workplace OHS requirements 20 Unit of competency
S2171 TDMMR2701A Operate & maintain marine internal combustion engines on vessels of 750 kw propulsion power or less 30 Unit of competency
S2172 TDMMR2801A Operate and maintain auxiliary systems on vessels up to 750 kw propulsion power 30 Unit of competency
S2173 TDMMR2901A Operate and maintain marine low and medium voltage electrical systems 20 Unit of competency
S2120 TDMMF2700A Prevent, control and fight fires on board a small vessel 14 Unit of competency
S2073 TDMMB2901A Recognise and correct deteriorated fittings and machinery 9 Unit of competency
S4302 SFISHIP212B Take emergency action on board a vessel 20 Unit of competency
M1356 MEM18.1AB Use hand tools 18 Unit of competency
M0411 MEM18.2AA Use power tools/hand held operations 18 Unit of competency
Replaced By
State Code National Code Title Type
W987 SFI30211 Certificate III in Fishing Operations Qualification
VET Info Notes
This training program is a representation of the qualification code SFI32204 taken from the Seafood Industry Training Package SFI04 which should be consulted for full description of requirements. SFI04 is endorsed until 31 January 2007.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the Challenger TAFE on 18 January 2005.
Entry Requirements
No information
Traineeships and Apprenticeships
No information