Qualification Outline

Date retreived
22/07/2026 4:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Metal Roofing and Cladding

Certificate II in Metal Roofing and Cladding

Qualification
National Code:
BCP20203
State Code:
W068
TGA Status:
Deleted
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
02/02/2009
Approved Date
09/11/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
552
Duration
4 Semesters
Current Release Number
1.00
Current Release Date
02/02/2009
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 02/02/2009 Current Approved
Description
Schedule
1.

CORE
The following units of competence must be achieved.

State Code National Code Title Hours Type
W1260 BCPCM2011A Apply first aid in the workplace 24 Unit of competency
W1251 BCPCM2002A Carry out interactive workplace communication 12 Unit of competency
W1256 BCPCM2007A Carry out levelling 12 Unit of competency
W1252 BCPCM2003A Carry out OH&S requirements 32 Unit of competency
W1257 BCPCM2008A Cut and join sheet metal 16 Unit of competency
W2722 BCPCM3001A Flash penetrations through roofs and walls 34 Unit of competency
W1254 BCPCM2005A Handle and store plumbing materials 12 Unit of competency
W1259 BCPCM2010A Mark out materials 16 Unit of competency
W1253 BCPCM2004A Read plans and calculate plumbing quantities 12 Unit of competency
W1317 BCPRF2002A Select and install roof sheeting and wall cladding 38 Unit of competency
W1255 BCPCM2006A Use plumbing hand and power tools 16 Unit of competency
W1250 BCPCM2001A Work effectively in the plumbing and services sector 16 Unit of competency
W1937 BCPRF2001A Work safely on roofs 20 Unit of competency
2.

ELECTIVES

State Code National Code Title Hours Type
W1318 BCPRF2003A Collect and store roof water 24 Unit of competency
W1258 BCPCM2009A Cut with oxy-LPG/acetylene 8 Unit of competency
W1820 BCGCM2008B Erect and dismantle restricted height scaffolding 16 Unit of competency
W2773 BCPRF3003A Fabricate and install external flashings 36 Unit of competency
W2772 BCPRF3002A Fabricate and install roof drainage components 80 Unit of competency
W2776 BCPRF3006A Install composite roof systems 36 Unit of competency
W2774 BCPRF3004A Install roof components 40 Unit of competency
W2775 BCPRF3005A Install roof coverings to curved roof structures 24 Unit of competency
W2771 BCPRF3001A Receive roofing materials 4 Unit of competency
W1262 BCPCM2013A Weld using arc welding equipment 8 Unit of competency
3.

Other ELECTIVE units of competence that may be considered as an alternative to the Group 02 electives.

State Code National Code Title Hours Type
N0360 BCF2009A Carry out load slinging of off-site materials 4 Unit of competency
W2770 BCPRF2004A Fabricate roof coverings for curved structures 16 Unit of competency
W1917 BCGWC3006B Install acoustic and thermal environmental protection systems 20 Unit of competency
W1266 BCPDR2001A Locate and clear blockages 10 Unit of competency
M1772 MEM5.50AA Perform routine gas metal arc welding 18 Unit of competency
W0822 MEM5.49AB Perform routine gas tungsten arc welding 18 Unit of competency
W1264 BCPCM3002A Weld polyethylene (PE) pipe using fusion method 8 Unit of competency
W1261 BCPCM2012A Weld using oxy-acetylene equipment 8 Unit of competency
Replaced By
State Code National Code Title Type
W575 CPC20808 Certificate II in Metal Roofing and Cladding Qualification
VET Info Notes
This training program is a representation of the qualification code BCP20203 taken from the Plumbing and Services Industry Training Package BCP03 which should be consulted for full description of requirements. BCP20203 is endorsed until 30 November 2006.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the METS CSSN (TAFEWA Swan) on 14 September 2005.
Entry Requirements
No information
Traineeships and Apprenticeships
No information