Qualification Outline
Date retreived
22/07/2026 10:46 AM AWST
22/07/2026 10:46 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Automotive (Mechanical - Wheel Alignment)
Certificate II in Automotive (Mechanical - Wheel Alignment)
Qualification
National Code:
AUR21899
AUR21899
State Code:
E122
E122
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0305 - Automotive Engineering And Technology
Original TGA Release Date
13/09/1999
Approved Date
13/11/2000
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
196
Duration
Unspecified
Current Release Number
1.00
Current Release Date
13/09/1999
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 13/09/1999 | Current | Archived |
Description
Schedule
1. CORE
Core units of competence
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| E1315 | AUR70314A | Contribute to workplace communication | 18 | Unit of competency |
| W1545 | AUR70421B | Establish relations with customers | 18 | Unit of competency |
| W1346 | AUR70125B | Follow workplace Occupational Health and Safety requirements | 18 | Unit of competency |
| W1544 | AUR70278B | Use and maintain workplace tools and equipment | 18 | Unit of competency |
2. CORE
Compulsory Stream
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| E1092 | AUR17108A | Carry out wheel alignment operations | 28 | Unit of competency |
| E1081 | AUR15130A | Inspect steering system | 8 | Unit of competency |
| E1087 | AUR16130A | Inspect suspension systems | 8 | Unit of competency |
| E1304 | AUR65130A | Inspect vehicle systems/components and determine preferred repair action | 18 | Unit of competency |
3. ELECTIVES
To meet the requirements of this qualification, the learner must select 3 competency standard units, aligned to the enterprise needs, from AUR99, or any other nationally endorsed Training Package. Pre-requisite competency standards units for selected elective will count as an elective competency unless in the compulsory stream competencies units. Listed below are sample competency units that may meet the needs of the enterprise.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| E1225 | AUR41803A | Apply legal requirements relating to product sales | 12 | Unit of competency |
| W1510 | AUR17606B | Balance tyres/wheels | 8 | Unit of competency |
| E1203 | AUR37608A | Carry out stock control procedures | 36 | Unit of competency |
| E1273 | AUR50318A | Dispose of waste and maintain a tidy work area | 28 | Unit of competency |
| W1537 | AUR52327B | Identify, clarify and resolve problems | 28 | Unit of competency |
| E1204 | AUR37637A | Maintain stock control | 36 | Unit of competency |
| W1511 | AUR17665B | Remove, fit and adjust wheel(s) | 18 | Unit of competency |
| W1513 | AUR17766B | Remove, repair and fit tyres and tubes (light) | 36 | Unit of competency |
| E1084 | AUR15170A | Service steering systems | 8 | Unit of competency |
| E1089 | AUR16170A | Service suspension systems | 8 | Unit of competency |
| W1528 | AUR25678B | Use and maintain measuring equipment | 12 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3658 | 10752NSW | Certificate II in Automotive Services (Tyre Fitting/Wheel Aligning) | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W205 | AUR20705 | Certificate II in Automotive Mechanical | Qualification |
VET Info Notes
NOTE:
This qualification includes a number of electives, each with different nominal
hours. The total hours of this qualification can therefore vary depending on
the electives selected.
This training program is a representation of the qualification AUR21899 taken
from the Automotive Training Package AUR99
which should be consulted for full descriptions of requirements. AUR99 is
accredited until 30/08/2002.
1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish to deliver
this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd, Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products
and Information Services 19/10/00.
This qualification includes a number of electives, each with different nominal
hours. The total hours of this qualification can therefore vary depending on
the electives selected.
This training program is a representation of the qualification AUR21899 taken
from the Automotive Training Package AUR99
which should be consulted for full descriptions of requirements. AUR99 is
accredited until 30/08/2002.
1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish to deliver
this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd, Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products
and Information Services 19/10/00.
Entry Requirements
No information
Traineeships and Apprenticeships