Qualification Outline

Date retreived
22/07/2026 12:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Dogging

Certificate III in Dogging

Qualification
National Code:
BCG30503
State Code:
W139
TGA Status:
Deleted
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
11/01/2003
Approved Date
21/01/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
400
Duration
4 Semesters
Current Release Number
1.00
Current Release Date
11/01/2003
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 11/01/2003 Current Approved
Description
Schedule
1.

CORE
All core units must be achieved.

State Code National Code Title Hours Type
W1889 BCGSF3001B Apply reinforcement schedule 16 Unit of competency
W1813 BCGCM1005B Carry out measurements and calculations 16 Unit of competency
W1812 BCGCM1004B Conduct workplace communication 16 Unit of competency
W1809 BCGCM1001B Follow OHS policies and procedures 32 Unit of competency
W1848 BCGDO3001B Perform dogging 80 Unit of competency
W1811 BCGCM1003B Plan and organise work 16 Unit of competency
W1814 BCGCM2001B Read and interpret plans and specifications 32 Unit of competency
W1847 BCGDO2001B Safely handle and use dogging tools and equipment 16 Unit of competency
W1810 BCGCM1002B Work effectively in the General Construction industry 16 Unit of competency
W1824 BCGCM3003B Work safely around power sources, services and assets 32 Unit of competency
2.

ELECTIVES
Four (4) of the following elective units to be selected in accordance with the Qualification Structuring Rules.

State Code National Code Title Hours Type
W1820 BCGCM2008B Erect and dismantle restricted height scaffolding 16 Unit of competency
W1880 BCGSC2002B Erect and dismantle scaffolding - basic 40 Unit of competency
W1762 BCCCM3003B Implement traffic management plan 16 Unit of competency
W1865 BCGRI3001B Operate personnel and materials hoists 24 Unit of competency
W1849 BCGDO3002B Perform crane scheduling 40 Unit of competency
W1819 BCGCM2007B Use explosive power tools (EPT) 8 Unit of competency
Replaces
State Code National Code Title Type
N020 BCG30998 Certificate III in General Construction (Materials Handling) Qualification
Replaced By
State Code National Code Title Type
W581 CPC30508 Certificate III in Dogging Qualification
VET Info Notes
This training program is a representation of the qualification code bcg30503 taken from the Genearl Construction Training Package BCG03 which should be consulted for full description of requirements. BCG30503 is endorsed until November 2006.

*** This qualification does noy fully replace BCG30998 Certificate III in General Construction (Materials Handling).
BCG30703 Certificate III in Rigging and Certificate III in Scaffolding should also be referred to.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the CSSN TAFEWA (Swan) on 02/12/2004.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR05480) DOGGING (LEVEL 3) Traineeship