Qualification Outline

Date retreived
22/07/2026 7:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in General Construction

Certificate II in General Construction

Qualification
National Code:
BCG20103
State Code:
W134
TGA Status:
Deleted
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
11/01/2003
Approved Date
21/01/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
400
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
11/01/2003
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 11/01/2003 Current Approved
Description
Schedule
1.

CORE
All core units must be achieved.

State Code National Code Title Hours Type
W1818 BCGCM2006B Apply basic levelling procedures 16 Unit of competency
W1821 BCGCM2009B Carry out basic demolition 16 Unit of competency
W1353 BCGCO2003B Carry out concreting to simple forms 24 Unit of competency
W1813 BCGCM1005B Carry out measurements and calculations 16 Unit of competency
W1812 BCGCM1004B Conduct workplace communication 16 Unit of competency
W2068 BCCCM2004B Drain and dewater site 12 Unit of competency
W1820 BCGCM2008B Erect and dismantle restricted height scaffolding 16 Unit of competency
W1809 BCGCM1001B Follow OHS policies and procedures 32 Unit of competency
W1816 BCGCM2004B Handle construction materials 16 Unit of competency
W1885 BCGSF2004B Place and fix reinforcement materials 40 Unit of competency
W1811 BCGCM1003B Plan and organise work 16 Unit of competency
W1814 BCGCM2001B Read and interpret plans and specifications 32 Unit of competency
W1817 BCGCM2005B Use construction tools and equipment 40 Unit of competency
W1810 BCGCM1002B Work effectively in the General Construction industry 16 Unit of competency
2.

ELECTIVES
Three (3) of the following elective units to be selected in accordance with the Qualification Structuring Rules.

State Code National Code Title Hours Type
W1815 BCGCM2002B Carry out excavation 16 Unit of competency
W1911 BCGWC2004B Complete penetrations and flashings 8 Unit of competency
W1760 BCCCM2013B Control traffic with a stop-slow bat 4 Unit of competency
W1834 BCGCO3007B Cut and core concrete 16 Unit of competency
W1785 BCGCA2003B Erect and dismantle formwork for footings and slabs on ground 32 Unit of competency
W1352 BCGCM2003B Install trench support 18 Unit of competency
S2438 TDTD1097B Operate a forklift 40 Unit of competency
W1865 BCGRI3001B Operate personnel and materials hoists 24 Unit of competency
W1931 BCGWP2003B Prepare for construction process (Waterproofing) 80 Unit of competency
W1895 BCGSP2003B Prepare surfaces for plastering 24 Unit of competency
W1932 BCGWP2004B Prepare surfaces for waterproofing application 80 Unit of competency
W1852 BCGPD2003B Remove and replace doors and door and window furniture 4 Unit of competency
W1819 BCGCM2007B Use explosive power tools (EPT) 8 Unit of competency
W1262 BCPCM2013A Weld using arc welding equipment 8 Unit of competency
W1759 BCCCM2009B Work in confined spaces 24 Unit of competency
Replaces
State Code National Code Title Type
N011 BCG20198 Certificate II in General Construction Qualification
Replaced By
State Code National Code Title Type
W569 CPC20108 Certificate II in Construction Qualification
VET Info Notes
This training program is a representation of the qualification code BCG20103 taken from the General Construction Training Package BCG03 which should be consulted for full description of requirements. BCG20103 is endorsed until November 2006.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the CSSN TAFEWA (Swan) on 02/12/2004.

4. The imp guide did not restrict this to traineeship delivery only, and the semester was changed from 4 to 2 to reflect a more realistic institutional pathway delivery. (Boon Liang VET Teaching & Learning 1/6/2005)
Entry Requirements
No information
Traineeships and Apprenticeships
(TR09420) BUILDING MAINTENANCE (LEVEL 2) Traineeship

(TR00590) GENERAL CONSTRUCTION (LEVEL 2) Traineeship