Qualification Outline

Date retreived
22/07/2026 6:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Rubber

Certificate III in Rubber

Qualification
National Code:
PMB30201
State Code:
C588
TGA Status:
Deleted
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0303 - Process And Resources Engineering
Original TGA Release Date
30/11/2001
Approved Date
04/07/2003
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
770
Duration
Unspecified
Current Release Number
1.00
Current Release Date
30/11/2001
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 30/11/2001 Current Approved
Description
Schedule
1.

To be awarded a Certificate III in Rubber, competency must be achieved in a total of 21 units of competency comprised of:** all 5 (five) core competencies ** at least 4 production competencies from the '300' series, (this may include up to 2 from the '400' series), many of which will have prerequisites ** other competencies relevant to the learner's workplace. These may be production or support competencies from this Training Package, and up to 6 competencies from another endorsed Training Package. Requirements for a streamed Certificate III are listed in section 3 of the Plastics, Rubber and Cablemaking Training Package.

CORE COMPETENCIES - Learners to complete all 5 (five) units listed below

State Code National Code Title Hours Type
C5718 PMBQUAL101A Apply quality processes 26 Unit of competency
C5756 PMBWKOPS101B Apply work procedures and practices 26 Unit of competency
C5561 PMBCOMM102B Complete workplace documents 26 Unit of competency
C5582 PMBOHS101B Follow OH&S policies and procedures 26 Unit of competency
C5570 PMBHAN103B Shift materials safely by hand 26 Unit of competency
2.

PRODUCTION COMPETENCIES

State Code National Code Title Hours Type
C5670 PMBPROD318B Build first stage tyres 52 Unit of competency
C5684 PMBPROD335B Build second stage tyres 30 Unit of competency
C5671 PMBPROD319B Build up rollers 52 Unit of competency
C5593 PMBPREP304B Change equipment dies 26 Unit of competency
C5594 PMBPREP305A Change extrusion die and calibration setup 60 Unit of competency
C5688 PMBPROD353A Compound materials using an internal mill blender 30 Unit of competency
C5689 PMBPROD354A Compound materials using an open mill blender 30 Unit of competency
C5691 PMBPROD356B Construct composite moulds 52 Unit of competency
C5692 PMBPROD357B Construct jigs and fixtures 52 Unit of competency
C5693 PMBPROD358B Develop patterns 52 Unit of competency
C5578 PMBMAINT303B Identify equipment faults 26 Unit of competency
C5677 PMBPROD326A Inspect tyres 20 Unit of competency
C5675 PMBPROD324A Inspect tyres for retreading 13 Unit of competency
C5676 PMBPROD325A Lay on tyre retreads 26 Unit of competency
C5658 PMBPROD306A Prepare and start equipment for production 20 Unit of competency
C5669 PMBPROD317B Print and decorate rigid products 52 Unit of competency
C5659 PMBPROD307B Produce calendered products 52 Unit of competency
C5694 PMBPROD360A Produce centrifugally cast polyurethane products 40 Unit of competency
C5666 PMBPROD314B Produce compression moulded products 52 Unit of competency
C5661 PMBPROD309B Produce electroplated products 52 Unit of competency
C5665 PMBPROD313B Produce extruded products 52 Unit of competency
C5678 PMBPROD327A Produce finished tyres 40 Unit of competency
C5672 PMBPROD320B Produce foam injected mouldings 52 Unit of competency
C5695 PMBPROD362A Produce gravity cast polyurethane products 40 Unit of competency
C5662 PMBPROD310B Produce injection moulded products 52 Unit of competency
C5687 PMBPROD349A Produce liquid surface coated products 40 Unit of competency
C5680 PMBPROD329B Produce polystyrene shape moulded products 52 Unit of competency
C5667 PMBPROD315B Produce polyurethane foam 52 Unit of competency
C5674 PMBPROD323B Produce powder coated products 52 Unit of competency
C5681 PMBPROD331B Produce printed and decorated film 52 Unit of competency
C5652 PMBPROD300A Produce products 40 Unit of competency
C5705 PMBPROD387A Produce welded plastics materials 40 Unit of competency
C5697 PMBPROD367A Remove and replace belts 10 Unit of competency
C5763 PMBPROD368A Repair conveyor belt carcass 30 Unit of competency
C5698 PMBPROD369A Repair conveyor belt covers 30 Unit of competency
C5591 PMBPREP301B Set up and prepare for production 13 Unit of competency
C5592 PMBPREP303B Set up equipment for continuous operation 26 Unit of competency
C5685 PMBPROD343B Shut down plant or plant area 13 Unit of competency
C5696 PMBPROD363A Splice conveyor belts on site 30 Unit of competency
C5702 PMBPROD374A Splice new belts or used belts off site 40 Unit of competency
C5660 PMBPROD308A Take a machine out of production 20 Unit of competency
C5726 PMBTECH301A Use material and process knowledge to solve problems 40 Unit of competency
C5703 PMBPROD375A Vulcanise products using an autoclave 40 Unit of competency
C5656 PMBPROD304B Wind products onto drums 26 Unit of competency
3.

SUPPORT COMPETENCIES - OH&S

State Code National Code Title Hours Type
C5583 PMBOHS204B Apply emergency/incident procedures 26 Unit of competency
C5576 PMBMAINT101B Conduct housekeeping activities 26 Unit of competency
M1256 PMCSUP272A Identify and act upon hazards in the workplace 20 Unit of competency
C5584 PMBOHS207B Implement and monitor OH&S policies and procedures 26 Unit of competency
C0953 PMAPER300A Issue work permits 10 Unit of competency
C0954 PMAPER301A Monitor and control work permits 10 Unit of competency
C0952 PMAPER200A Work in accordance with an issued permit 10 Unit of competency
4.

SUPPORT COMPETENCIES - INTERPERSONAL

State Code National Code Title Hours Type
C5742 PMBTRAIN201A Assist in the provision of on the job training 30 Unit of competency
C0942 PMACOM300A Contribute to the development of plant documentation 30 Unit of competency
E0964 LMTPRGN15A Coordinate work of team/section 30 Unit of competency
C5725 PMBSUP383A Facilitate a team 20 Unit of competency
C5758 PMBWKOPS303B Induct new team members 26 Unit of competency
C5759 PMBWKOPS304B Interpret job specifications 26 Unit of competency
C5761 PMBWKOPS309A Maintain and organise workplace records 26 Unit of competency
C5760 PMBWKOPS305B Perform shift handover 13 Unit of competency
C5757 PMBWKOPS106B Work with others in a team 26 Unit of competency
5.

SUPPORT COMPETENCIES - QUALITY/TECHNICAL

State Code National Code Title Hours Type
C5724 PMBSUP301A Apply HACCP to the workplace 30 Unit of competency
M0333 MEM9.1AA Draw and interpret sketch 18 Unit of competency
M0334 MEM9.2AA Interpret technical drawing 36 Unit of competency
C5559 PMBCALC101A Make measurements 26 Unit of competency
C5719 PMBQUAL290A Monitor and maintain product quality 52 Unit of competency
C5720 PMBQUAL291A Participate in continuous improvement 26 Unit of competency
M0394 MEM15.1AA Perform basic statistical quality control 18 Unit of competency
C1843 PMLTEST300A Perform basic tests 40 Unit of competency
M1266 PMCSUP292A Sample and test materials and product 20 Unit of competency
C5721 PMBQUAL390A Solve problems using 'quality tools' 40 Unit of competency
C5562 PMBCOMP201B Use computers in the workplace 26 Unit of competency
C5560 PMBCALC303B Use precision measuring equipment 26 Unit of competency
6.

SUPPORT COMPETENCIES - ENVIRONMENTAL

State Code National Code Title Hours Type
C5743 PMBWASTE101B Collect waste for recycling or safe disposal 26 Unit of competency
C5744 PMBWASTE302B Coordinate waste disposal 26 Unit of competency
C5563 PMBENV100A Identify and minimise environmental hazards 20 Unit of competency
C5564 PMBENV200A Respond to environmental hazards 20 Unit of competency
7.

SUPPORT COMPETENCIES - HANDLE GOODS

State Code National Code Title Hours Type
C5572 PMBHAN202B Load and unload goods 30 Unit of competency
S0744 TDTD1097A Operate a forklift 40 Unit of competency
C5573 PMBHAN204B Package goods/materials 26 Unit of competency
C5571 PMBHAN201B Process orders and despatch products 26 Unit of competency
C5586 PMBORG205B Receive goods 26 Unit of competency
C5575 PMBHAN208B Store products 26 Unit of competency
C5574 PMBHAN205B Transfer loads with slings 26 Unit of competency
8.

SUPPORT COMPETENCIES - TRAINING AND ASSESSMENT

State Code National Code Title Hours Type
C0085 BSZ402A Conduct assessment 15 Unit of competency
C0084 BSZ401A Plan assessment 15 Unit of competency
C0086 BSZ403A Review assessment 5 Unit of competency
C0087 BSZ404A Train small groups 30 Unit of competency
Replaced By
State Code National Code Title Type
W400 PMB30107 Certificate III in Polymer Processing Qualification
VET Info Notes
This training program is a representation of the qualification code PMB30201 taken from the Plastics, Rubber and Cablemaking Training Package PMB01 which should be consulted for full description of requirements. PMB01 is endorsed until 30/11/2004.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to STARS by the Central TAFE on 13/05/03.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR08310) PROCESS MANUFACTURING (RUBBER-INJECTION MOULDING) (LEVEL 3) Traineeship

(TR08350) RUBBER - RUBBER LINING (LEVEL 3) Traineeship

(TR08360) RUBBER (LEVEL 3) Traineeship