Qualification Outline
Date retreived
23/07/2026 7:35 AM AWST
23/07/2026 7:35 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Process Manufacturing (Specialised Processes)
Certificate III in Process Manufacturing (Specialised Processes)
Qualification
National Code:
PMB31598
PMB31598
State Code:
C134
C134
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0303 - Process And Resources Engineering
Original TGA Release Date
22/10/1998
Approved Date
10/12/1999
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
299
Duration
Unspecified
Current Release Number
1.00
Current Release Date
22/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 22/10/1998 | Current | Archived |
Description
Schedule
1. ELECTIVES
There are no compulsory units, learners to select seven units - 5 units from the list in the training package under PMB31598 and up to 2 units may be selected from other Training Package(s) from a certificate III qualification.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C0826 | PMBPROD58A | Develop patterns | 52 | Unit of competency |
| C0802 | PMBPROD34A | Monitor product quality standards | 52 | Unit of competency |
| C0833 | PMBPREP01A | Prepare for production | 13 | Unit of competency |
| C0795 | PMBPROD27A | Run cold coating machines | 52 | Unit of competency |
| C0794 | PMBPROD26A | Run hot melt coating machines | 52 | Unit of competency |
| C0810 | PMBPROD42A | Troubleshoot production faults and defects | 52 | Unit of competency |
| C0728 | PMBCALC03A | Use precision measuring equipment | 26 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C587 | PMB30101 | Certificate III in Plastics | Qualification |
VET Info Notes
GENERAL NOTES
This training program is a representation of the qualification PMB31598 taken
from the Plastics, Rubber and Cablemaking Training Package PMB98 which should
be consulted for full descriptions of requirements. PMB98 is accredited until
01/10/2000.
1. This qualification is the copyright of The Australian National Training
Authority.
2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by Central College of TAFE
on 10/12/99.
This training program is a representation of the qualification PMB31598 taken
from the Plastics, Rubber and Cablemaking Training Package PMB98 which should
be consulted for full descriptions of requirements. PMB98 is accredited until
01/10/2000.
1. This qualification is the copyright of The Australian National Training
Authority.
2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by Central College of TAFE
on 10/12/99.
Entry Requirements
No information
Traineeships and Apprenticeships