Qualification Outline

Date retreived
22/07/2026 9:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Blinds and Awnings

Certificate II in Blinds and Awnings

Qualification
National Code:
LMF21008
State Code:
W502
TGA Status:
Deleted
DTWD Status:
Deleted
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
04/06/2012
Approved Date
19/06/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
415
Duration
1 Semester
Current Release Number
2.00
Current Release Date
04/06/2012
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 04/06/2012 Current Approved
Description

This qualification describes the skills and knowledge required to perform basic tasks in blind and awning manufacture involving known routines and procedures and some accountability for the quality of outcomes.
Job roles/employment outcomes
The LMF21008 Certificate II in Blinds and Awnings reflects vocational outcomes for those performing job roles in construction of a range of blinds and awnings using textiles, timber, plastic, steel and aluminium.
Application
This qualification is typically used to develop skills and knowledge in blind and awning manufacturing processes where there is a clearly defined range of contexts in which the choice of actions required is usually clear and there is limited complexity in the range of options to be applied. It could include collaboration with others through members of a group or team.
Pathways into the qualification
This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have completed LMF10108 Certificate I in Furnishing or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification may include LMF31808 Certificate III in Blinds and Awnings and relevant supervisory, management or competitive manufacturing qualifications.

Schedule
Packaging Rules
To be awarded the LMF21008 Certificate II in Blinds and Awnings, competency must be
achieved in fourteen (14) units of competency.
- six (6) core units of competency
- eight (8) elective units of competency made up of;
- a minimum of four (4) units from Group A
- least one (1) and up to three (3) units from Group B
- Up to three (3) relevant units may be chosen from other units not already selected from Groups A and B, or units available in this Training Package or other endorsed Training Packages and accredited courses. The units must be aligned at Certificate II or Certificate III level (a maximum of 1 from Certificate III)
- Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
- If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements

Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units.
1. Core Units

All six (6) units must be completed

State Code National Code Title Hours Type
W8281 MSAPMSUP102A Communicate in the workplace 26 Unit of competency
W8247 MSAPMOHS100A Follow OHS procedures 26 Unit of competency
W7008 MSAPMOPS101A Make measurements 20 Unit of competency
D3655 MSAENV272B Participate in environmentally sustainable work practices 20 Unit of competency
W8468 LMFBA2001A Use blinds and awnings sector hand and power tools 40 Unit of competency
W8282 MSAPMSUP106A Work in a team 26 Unit of competency
2. Group A Electives

Five (5) units to be completed
The following group outlines ONE example of a training program for this qualification.
Please refer to the Training Package for the full details of available units.

State Code National Code Title Hours Type
W8471 LMFBA2005A Construct roll up and pull down style blinds and awnings 56 Unit of competency
W8757 LMFSF2001B Cut single layer fabrics 40 Unit of competency
W8758 LMFSF2002B Machine sew materials 48 Unit of competency
W8695 LMFGN3001B Read and interpret work documents 24 Unit of competency
W8470 LMFBA2004A Select and apply blinds and awnings hardware and fixings 20 Unit of competency
3. Group B Electives

Three (3) units to be completed
The following group outlines ONE example of a training program for this qualification.
Please refer to the Training Package for the full details of available units.

State Code National Code Title Hours Type
W8694 LMFGN2002B Move and store materials and products 16 Unit of competency
S5516 TLIA1107C Package goods 20 Unit of competency
W8469 LMFBA2002A Set up, operate and maintain blinds and awnings sector static machines 56 Unit of competency
No information
VET Info Notes
This qualification has been moved into the new MSF20113 Certificate II in Furnishing, NOT EQUIVALENT.
TGA release date 10 December 2013.
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
No information