Qualification Outline

Date retreived
22/07/2026 9:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Transport and Distribution (Marine Engine Driving)

Certificate II in Transport and Distribution (Marine Engine Driving)

Qualification
National Code:
TDM20201
State Code:
S207
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0317 - Maritime Engineering And Technology
Original TGA Release Date
31/07/2001
Approved Date
19/02/2003
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
150
Duration
1 Semester
Current Release Number
1.00
Current Release Date
31/07/2001
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 31/07/2001 Current Approved
Description
Schedule
1.

Requirements for completion of the qualification
A successful assessment outcome of a total of 17 units must be achieved
- Complete the 8 pre-sea entry level units
- Select 9 units chosen from relevant cross industry units listed in the Maritime Training Package TDM01.

PRE-SEA UNITS

State Code National Code Title Hours Type
S2928 TDMMF801B Comply with emergency procedures on board a vessel 4 Unit of competency
S2152 TDMML201A Contribute to effective human relationships on board a vessel 4 Unit of competency
S2923 TDMMF5302A Fight and extinguish fires on board a small vessel 4 Unit of competency
S2927 TDMMF701B Observe safe working practices and procedures on board a vessel 4 Unit of competency
S2101 TDMMF1001A Provide first aid 20 Unit of competency
S2103 TDMMF1101A Survive at sea in the event of vessel abandonment 16 Unit of competency
S2095 TDMME101A Understand orders and be understood in relation to shipboard duties 4 Unit of competency
2.

See the Maritime Training Package TDM01 Version 2.0, for the Qualification Packaging Rules and the Complete List of Units available as Electives.

State Code National Code Title Hours Type
S2071 TDMMB1901A Carry out basic hull servicing 9 Unit of competency
S2934 TDMMR5402A Carry out refuelling and fuel transfer operations 4 Unit of competency
S2931 TDMMU502A Ensure compliance with environmental considerations in a small domestic vessel 2 Unit of competency
S2130 TDMMF3901A Maintain running log including fuel calculations and written reports 9 Unit of competency
S2162 TDMMR1801A Operate deck machinery installed on a small vessel 12 Unit of competency
S2076 TDMMB3601A Prepare a small vessel's machinery for sea 12 Unit of competency
S2163 TDMMR1901A Safely handle and stow explosive and flammable materials 3 Unit of competency
M1356 MEM18.1AB Use hand tools 18 Unit of competency
M0411 MEM18.2AA Use power tools/hand held operations 18 Unit of competency
Replaced By
State Code National Code Title Type
S516 TDM20207 Certificate II in TRANSPORT & DISTRIBUTION (MARINE ENGINE DRIVING - GRADE 3) Qualification
VET Info Notes
1. This qualification is the copyright of The Australian National Training Authority. RTO's who wish to deliver this qualification must be registered by their State accrediting body.

2. Further information on this qualification is contained in the Maritime Training Package available from Australian Training Products Ltd., Tel: (03) 9655 0600.

3. This qualification was entered on to the CMS by Challenger TAFE on 25 October 2002.

4. This qualification was last edited on 28 July 2003 by Challenger TAFE.

5. This qualification was amended on 8 February 2005 as per the Maritime Training Package TDM01 Version 2.0 Implementation Guide approved on 17/12/2004.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR02830) MARITIME OPERATIONS - MARINE ENGINE DRIVING (GRADE 3) Traineeship

Part-time is defined as a minimum of 20 hours per week.